SPECIFICATION HIOKI DT4253 DIGITAL MULTIMETER
|DC Voltage range||600.0 mV to 1000 V
5 ranges, Basic accuracy: ±0.3 % rdg. ±5 dgt.
|AC Voltage range||6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
|Resistance range||600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.|
|DC Current range||60.00 μA to 60.00 mA, 4 ranges,
Basic accuracy: ±0.8 % rdg. ±5 dgt.
|From 4 to 20mA Percentage conversion display||Yes|
|AC Current range (use with Clamp on probes)||10.00 A to 1000 A, 7 ranges, Add the Clamp on probe accuracy to basic accuracy 40 – 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)|
|Temperature (thermocouples)||K: -40.0 to 400.0 °C , Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C|
|Capacitance range||1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.|
|Frequency range||99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage),
Basic accuracy: ±0.1 % rdg. ±1 dgt.
|Continuity check||Continuity threshold [ON]: 25 Ω or less ,
[OFF]: 245 Ω or more,
Response time: 0.5 ms or more
|Diode test||Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less,
Threshold of forward voltage: 0.15 V to 1.5 V
|Other functions||Filter function, display value hold, auto hold, MAX/MIN/Average value display, relative value display, auto-power save, USB communication (option), 4-20 mA percentage conversion|
|Display||Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph|
|Display refresh rates||5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s)|
|Power supply||LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)|
|Dimensions and mass||84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D,
390 g (13.8 oz) (including batteries and holster)
|Accessories||Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4|
Introduction Hioki DT4253 Digital Multimeter
The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The Hioki DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1kHz bandwidth. CAT IV 600V, CAT III 1000V
Key Features Hioki DT4253 Digital Multimeter
• Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA) with built in high-sensitivity current ranges (DT4253)
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Dual display lets you check voltage and frequency simultaneously
Established in 1935, HIOKI E.E. CORPORATION (TSE: 6866) has grown to become a world leader in providing consistent delivery of test and measuring instruments through advanced design, manufacturing, and sales and services. Hioki test tools are trusted for their safety, reliability and quality by electrical professionals for use in rigorous environments around the world. Hioki products apply the latest and most advanced technologies to ensure the highest accuracy and safety.