GW INSTEK GPM-8213 DIGITAL POWER METER

SPECIFICATIONS GW INSTEK GPM-8213 DIGITAL POWER METER

Input

Input voltage: 600 Vrms

Input current: 20 Arms

Input impedance(50/60 Hz): Voltage: 2.4MΩ. Current: 5mA – 200mA; 500mΩ. 0.5A -20A; 5mΩ

Maximum display voltage: 700 Vrms

Maximum display current: 25 Arms

Maximum allowable isolation voltage: 300V

Low frequency filter: Cut-off frequency: 500 Hz

Display

Synchronization frequency: 45Hz~ 6kHz

Average: 1, 2, 4, 8, 16, 32, 64

Displayed items(Standard mode): 8 items simultaneously.

Displayed items(Simple mode): 4 items simultaneously.

Displayed digits: 5

Voltage converter (PT ratio): 1 to 9999.999

Current converter (CT ratio): 1 to 9999.999

Measurement items: Voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, integrated current, integrated power, positive integrated power, negative integrated power, integration time, voltage crest factor, current crest factor, voltage peak, current peak, Thd

Displayed measurement parameters: Vdc, Vrms, V+pk, V-pk, Idc, Irms, I+pk, I-pk, P, P+pk, P-pk, VA, VAR, PF, CFV, CFI, DEG, VHz, IHz, THDV, THDI

Voltage Measurement

Measurement range: CF=3 : 15V, 30V, 60V, 150V, 300V, 600V. CF=6: 7.5V, 15V, 30V, 75V, 150V, 300V

Crest factor: 3, 6

Accuracy: Effective range: 1 % to 105 % of range; DC: ±(0.2 % reading + 0.2% range); 45 Hz ≤ f ≤ 66 Hz: ±(0.1 % reading + 0.1% range); 66 Hz < f ≤ 1kHz: ±(0.1 % reading + 0.2% range); 1 kHz < f ≤ 6kHz: ± 3 % of range; The filter is turned on: Increase 0.3 % reading@ 45Hz to 66Hz

Temperature effect: 5-18 ̊C / 28-40 ̊C; Increase ±0.03% reading / ̊C

Residual noise: 0.5 % of range

Current Measurement GW Instek GPM-8213

Measurement range: CF=3 : 5mA, 10mA, 20mA, 50mA, 100mA, 200mA, 500mA, 1A, 2A, 5A, 10A, 20A; CF=6 : 2.5mA, 5mA, 10mA, 25mA, 50mA, 100mA, 250mA, 0.5A, 1A, 2.5A, 5A, 10A

Crest factor: 3, 6

Accuracy: Effective range: 1 % to 105 % of range; DC: ±(0.2 % reading + 0.2% range); 45 Hz ≤ f ≤ 66 Hz: ±(0.1 % reading + 0.1% range); 66 Hz < f ≤ 1kHz: ±(0.1 % reading + 0.2% range); 1 kHz < f ≤ 6kHz: ± 3 % of range; The filter is turned on: Increase 0.3 % reading@ 45Hz to 66Hz

Temperature effect: 5-18 ̊C / 28-40 ̊C: Increase ±0.03% reading / ̊C

Residual noise: 0.5 % of range

Power Measurement

Accuracy: Effective range: 1 % to 110 % of range; DC: ±(0.2 % reading + 0.2% range); 45 Hz ≤ f ≤ 66 Hz: ±(0.1 % reading + 0.1% range); 66 Hz < f ≤ 1kHz: ±(0.1 % reading + 0.3% range); 1 kHz < f ≤ 6kHz: ± 0.3% of range

The filter is turned on: Increase 0.3 % reading@ 45Hz to 66Hz

Temperature effect: 5-18 ̊C / 28-40 ̊C: Increase ±0.03% reading / ̊C

Frequency Measurement

Measurement range: The filter is turned on: 30.000Hz to 499.99Hz; The filter is turned off: 30.000Hz to 9.9999kHz

Measurement items: Voltage, Current

Effective input range: 10% to 105% of voltage input range

Accuracy: ±(0.06 % reading)

Integrator Measurement

Integrator: Accuracy: ±(Accuracy of voltage or current+ 0.1 % reading)

Time: Range: 0 hour 0 minute to 9999 hours 59 minutes

Accuracy: ±0.01% ±1second

Introduction GW Instek GPM-8213 Digital Power Meter

GW Instek GPM-8213 digital power meter is designed specifically for single-phase (1P/2W) AC power supply’s power measurements. Powerful features, including 4” TFT LCD, five-digit measurement display, 19 power measurement parameters, integral measurement function, high-accuracy voltage/current/power measurement capabilities, front/rear panel input terminals, and various communications ports, are to facilitate users with clear, convenient, and accurate power measurements.

Features 

– 4” TFT LCD
– Two data display modes
– Standard : two major measurement items + six secondary measurement items
– Simple : displaying test data of four different measurement items
– Met the SPECpower measurement requirement
– Met the requirement of IEC 62301 power measurement
– Voltage/ current test frequency bandwidth : DC~6kHz
– Watt resolution : 1mW
– Lowest current range : 5mA, resolution : 0.1uA
– Current/voltage measurements reach CF=3 for distorted wave and CF=6 for half range
– W-h (power vs time)/A-h (current vs time) integration function
– Total harmonic distortion measurement
– Front panel test terminal
– Standard interface : RS-232C, USB device, LAN
– Optional interface : GPIB
– Optional test fixture : GPM-001