GW Instek MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES

Key Features

  •  300/200/100MHz bandwidth selections ;2 channels
  •  Real time sampling rate is 2GSa/s max.
  •  Per Channel 20M memory depth and VPO waveform display technology
  •  Waveform update rate up to 120,000 wfms/s
  •  8 “ WVGA TFT LCD display

SPECIFICATIONS GW INSTEK MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES

Channels: 2CH+ EXT.

Bandwidth(‐3dB): DC~100MHz

Rise time: 3.5ns

Bandwidth Limit: 20MHz

AWG Specifications GW Instek MDO-2102AG

Channels: 2

Sample Rate: 200 Msa/s

Vertical Resolution: 14 bits

Max. Frequency: 25 MHz

Waveforms: Sine, Square, Pulse, Ramp, DC, Noise, Fall, Haversine, Cardiac

Output Range: 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω

Output Resolution: 1mV

Output Accuracy: 2% (1 kHz)

Offset Range: ±2.5 V, HighZ;±1.25 V, 50 Ω

Offset Resolution: 1mV

  • Sine

Frequency Range: 100mHz to 25MHz

Flatness (relative to 1kHz): ±0.5 dB<15MHz; ±1 dB:15MHz~25MHz

Harmonic Distortion: ‐40 dBc

Stray (Non‐harmonic): ‐40 dBc

Total Harmonic Distortion: 1%

S/N Ratio: 40 dB

  • Square/Pulse

Frequency Range: 100 mHz to 15MHz

Rise/Fall time: <15ns

Overshoot: <3%

Duty cycle: Square:50%;Pulse:0.4%~99.6%

Min. Pulse Width: 30 ns

Jitter: 500 ps

  • Ramp

Frequency Range: 100mHz~1MHz

Linearity: 1%

Symmetry: 0 to 100%

Frequency Response Analysis GW Instek MDO-2102AG

Dynamic Range: > 80 dB (typical)

Input and Output Sources: Channel 1 or 2

Frequency Range: 20 Hz to 25 MHz

Number of Test Points: 10 to 90 points per decade

Test Amplitude: 20 mVpp to 5 Vpp into High‐Z ;Fixed test amplitude or custom amplitude for each decade

Test Results: Logarithmic overlaid gain and phase plot

Manual Measurements: Two pairs of tracking gain and phase markers

Plot Scaling: Auto‐scaled during test

Miscellaneous

Multi‐language menu: Available

operation environment: Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C

On‐line help: Available

Time clock: Time and Date ,Provide the Date/Time for saved data

Dimensions: 384mmX208mmX127.3mm

Weight: 3kg

Introduction GW Instek MDO-2102AG

MDO-2000A is an advanced version of MDO-2000E. The selectable bandwidth range is upgraded to 300MHz. The full bandwidth ranges include 300MHz, 200MHz and 100MHz. The sampling rate has upgraded to Max. 2GSa/s and the memory depth has also been upgraded to 20M/CH. Hence, the three major specifications of oscilloscopes have been improved. The new models of the series feature 2 channels including MDO-2000A and MDO-2000AG. The entire series offers the functions of oscilloscope and spectrum analyzer. On top of that, MDO-2000AG features a dual-channel 25MHz arbitrary waveform generator. The new generation MDO-2000A series provides better sampling rate and memory depth for users to obtain more realistic signal integrity, and higher bandwidth selections meet the measurement requirements of higher frequencies.

Features

– 300/200/100MHz bandwidth selections ;2 channels
– Real time sampling rate is 2GSa/s max.
– Per Channel 20M memory depth and VPO waveform display technology
– Waveform update rate up to 120,000 wfms/s
– 8 “ WVGA TFT LCD display
– Maximum 1M FFT provides higher frequency domain resolution measurements
– High ,low and band pass filter functions (GW Instek MDO-2202AG)
– 29,000 segmented memories and waveform search functions
– I2C/UART/CAN/LIN serial bus trigger and decoding function
– Data log function is able to track signal changes up to 1000 hours
– Network storage function
– Mask test function
– MDO-2000AG equips with a dual channel 25MHz AWG

Attribute

Brand

Review GW Instek MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review GW Instek MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    RECENT PRODUCT

    Hotline: 0908 173 345
    Zalo: 0908 173 345 Nhắn tin Facebook Gửi Mail