Tiếng Việt
Introduction Schneider PM5350 Power and Energy Meter
The Schneider PM5350 Power Meter offers electrical installation measurement capabilities in a single 96 x 96 mm unit. Three-phases and neutral can be monitored simultaneously using a bright, anti-glare display with large characters and backlighting. Menus are intuitive and the meter supports English, Chinese, Hebrew, and Spanish languages. Its compact size and high performance make the PowerLogic PM5350 sereis suitable for many applications.
Schneider PM5350 Power and Energy Meter
Features Schneider PM5350 Power and Energy Meter
Easy to install
- Mounts using two clips, no tools required. Ultra compact meter with 44 mm depth connectable up to 480 V L-L without voltage transformers for installations compliant with category III, as per IEC 61010-1. See specification table for UL voltage limits.
Easy to operate
- Intuitive navigation with self-guided, language selectable menus, six lines, four concurrent values. Two LEDs help confirm normal operation.
Easy circuit breaker monitoring and control
- Two relay outputs (high performance) to command most circuit breaker coils directly. Monitored switches can be wired directly without external power supply.
System status at a glance
- Bright, anti-glare, backlit display plus two LEDs; orange for energy pulse or alarm and green for heartbeat/communications indication.
IEC 62053-22 class 0.5S accuracy for active energy
- Accurate energy measurement for cost allocation.
Power Quality analysis
- The PM5350P offers THD and TDD measurements as standard. Total Demand Distortion is based on a point of common coupling (PCC), which is a common point that each user receives power from the power source. The TDD compares the contribution of harmonics versus the maximum demand load. In addition, it has individual harmonics (odd) measurement up to 31st harmonics. These types of power quality parameters help to identify the source of harmonics that can harm transformers, capacitors, generators, motors and electronic equipment.
Benefits
System integrators’ benefit
- Ease of integration
- Ease of setup
- Cost effectiveness
Panel builders’ benefit
- Ease of installation
- Cost effectiveness
- Aesthetically pleasing
- Simplified ordering
End users’ benefit
- Ease of use
- Precision metering & sub-billing
- Billing flexibility
- Comprehensive, consistent and superior performance
Applications
- Panel instrumentation.
- Cost allocation or energy management
- Electrical installation remote monitoring
- Sophisticated alarming
- Circuit beaker monitoring and control
Specifications
| Power quality analysis | Total demand distortion total harmonic distortion |
| Device application | Power monitoring |
| Type of measurement | Current Voltage Frequency Power factor Energy Phase angle Apparent power Active power Reactive power |
| supply voltage | 90…450 V AC 45…65 Hz 100…300 V DC |
| Network frequency | 50 Hz 60 Hz |
| [In] rated current | 5 A 1 A |
| type of network | 1P + N 3P + N 3P |
| Maximum power consumption in VA | 11.9 VA |
| Ride-through time | 100 ms 120 V AC typical 400 ms 230 V AC typical 50 ms 125 V DC typical |
| Display type | Monochrome graphic LCD |
| Display resolution | 6 lines |
| Sampling rate | 32 samples/cycle |
| Measurement current | 5…9000 mA |
| Analogue input type | Current 0.05…9 A (impedance <= 0.3 mOhm) Voltage (impedance 10 MOhm) |
| Measurement voltage | 35…760 V AC 45…65 Hz phase to phase 20…400 V AC phase to neutral |
| Frequency measurement range | 45…70 Hz |
| Number of inputs | 4 digital |
| Measurement accuracy | Current +/- 0.5 % Voltage +/- 0.5 % Frequency +/- 0.05 % Power factor +/- 0.5 Active energy +/- 0.5 % Reactive energy +/- 2 % Active power +/- 0.5 % Apparent power +/- 0.5 % Apparent energy +/- 0.5 % Reactive power +/- 2 % |
| Accuracy class | Class 0.5S active energy conforming to IEC 62053-22 Class 0.5 active energy conforming to IEC 61557-12 Class 3 reactive energy conforming to IEC 62053-23 Class 2 reactive energy conforming to IEC 61557-12 Class 0.5 power conforming to IEC 61557-12 |
| Number of outputs | 2 relay |
| Information displayed | Tariff (4) |
| Communication port protocol | JBUS Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds |
| Communication port support | Terminal block: RS485 |
| Data recording | Min/max of instantaneous values Alarms |
| Connections – terminals | Voltage circuit: screw terminal block4 Control circuit: screw terminal block2 Current transformer: screw terminal block6 Input/output circuit: screw terminal block6 Relay output: screw terminal block4 Ethernet network: RJ45 connector |
| Mounting mode | Flush-mounted |
| type of installation | Indoor installation |
| Standards | IEC 61010-1 |
| Product certifications | CE CULus |
| Width | 96 mm |
| Depth | 44 mm |
| Height | 96 mm |
| Net weight | 0.25 kg |
Reviews
There are no reviews yet.