SPECIFICATIONS HIOKI IM3533 LCR METER
LCR (Measurement with single condition), Transformer testing (N, M, ΔL), Continuous testing(Continuous measurement under saved conditions) (LCR mode)
Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), N, M, ΔL, T
Measurement range: 100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)
Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only
θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999)
Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%), T: -10.0°C to 99.9°C
Basic accuracy: Z : ±0.05% rdg. θ: ±0.03°
Measurement frequency: 1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal level:[Normal mode]
V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps[Low impedance high accuracy mode]
V mode, CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode: 10 μA to 100 mArms, 10 μArms steps
Output impedance: Normal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display: 5.7-inch touch-screen color TFT, display can be set to ON/OFF
Measurement time: 2 ms (1 kHz, FAST, display OFF, representative value)
DC bias measurement, DC resistance temperature compensation (converted reference temperature display), Comparator, BIN measurement (classify function), Panel loading/saving, Memory function
Interfaces: EXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply: 100 to 240 V AC, 50/60 Hz, 50 VA max
Dimensions and mass: 330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
Accessories: Power cord × 1, Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1
Introduction Hioki IM3533
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components.
The IM3533 series are Hioki’s first LCR meters to offer turn ratio, mutual inductance and inductance difference measurements of transformers and coils, and are integrated with an internal DC bias to facilitate HDMI compliance testing.
Continuous measurement using different sets of conditions
The Hioki IM3533 LCR Meter can perform continuous measurement using different capacitor measurement conditions, for example to perform C-D measurement at 120 Hz and ESR measurement at 100 kHz, without stopping to manually change settings.
Turn ratio measurement
In transformer and winding measurement, the Hioki IM3533 LCR meter can measure primary-side and secondary-side L values and then calculate and display the turn ratio.
This capability eliminates the need to manually calculate this value, as in the conventional approach.
Mutual inductance measurement
In transformer measurement, the Hioki IM3533 LCR Meter can perform L measurement with a same-phase series connection and again with a reverse-phase series connection, and then calculate and display the mutual inductance. This capability eliminates the need to manually calculate this value, making it more convenient and efficient than the conventional approach.
Frequency sweep measurement
The IM3533-01 can perform automatic measurement while sweeping through up to 801 frequencies from a user-specified frequency range or frequency list. Measurement results can be saved on a USB flash drive or computer via the instrument’s interface in order to create lists and graphs of frequency characteristics using the included LCR application software.
Features HIOKI IM3533 LCR METER
– ±0.05% accuracy with wide measurement range (DC, 1mHz to 200kHz, 5mV to 5V, 10uA to 50mA)
– Non-stop testing over mixed measurement conditions such as C-D and ESR at 10 times the speed of previous models
– Built-in low impedance high precision mode effective for testing low inductance or the ESR of aluminum electrolysis capacitance
– Dedicated modes for measuring transformer winding ratio, mutual inductance and temperature compensated DCR
– Frequency sweep testing (IM3533-01 only)
– 2m/4m cable setting in addition to the standard 0m/1m
– Touch screen with intuitive operation
Established in 1935, HIOKI E.E. CORPORATION (TSE: 6866) has grown to become a world leader in providing consistent delivery of test and measuring instruments through advanced design, manufacturing, and sales and services. Hioki test tools are trusted for their safety, reliability and quality by electrical professionals for use in rigorous environments around the world. Hioki products apply the latest and most advanced technologies to ensure the highest accuracy and safety.