Fluke ScopeMeter 190-504/S Portable Oscilloscope

Features

Four electrically isolated inputs
CAT III 1000 V / CAT IV 600 V safety rated
Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models
Fast sampling rate, up to 5 GS/s with up to 200 ps resolution (Depending on model and channels used)
Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details

Description
Additional information

Introduction Fluke ScopeMeter 190-504/S Portable Oscilloscope

Why choose the new 500 MHz four-channel ScopeMeter® test tool?

A faster sample rate and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.

See more, fix more with the four-channel CAT IV rated Fluke ScopeMeter 190-504/S

The Fluke ScopeMeter 190 Series II combines the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

The 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more

Features

Four electrically isolated inputs
CAT III 1000 V / CAT IV 600 V safety rated
Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models
Fast sampling rate, up to 5 GS/s with up to 200 ps resolution (Depending on model and channels used)
Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
Dedicated 999 Count digital multimeter.
Four meter measurements via scope BNC inputs in four-channel models
Connect-and-View™ continuous auto-trigger, single shot, pulse width, and video triggering
ScopeRecord roll mode, capture waveform sample data for up to 48 hours
TrendPlot, trend measurement readings for up to 22 days
Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
IP-51 rated for dust and drip proof to withstand harsh environments
Isolated USB ports for memory devices and PC connectivity
Li-Ion battery for extended operating timespan:
- 190-X04, four-channel models up to 7 hour (BP291 included standard)
- Charge spare battery using optional external battery charger EBC290
Easy-access battery door to make it easy to swap batteries
A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Specifications

Specifications
Bandwidth	500 MHz
Number of channels	500 MHz: 4 channels
Real-time sample rate	5 GS/s
Inputs	4x BNc input scope plus DMM input
Independently floating isolated inputs	Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Input sensitivity	2 mV-100 V/div plus variable attentuation
Trigger types	Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger source	4x BNC input
Glitch capture	8 ns
Scope measurements	Cursor: 7
Scope measurements	Automatic: 30
Maximum record length	ScopeRecord mode: 30,000 pts per input
Maximum record length	Scope mode: 10,000 pts per input
Persistence	Digital persistence giving analog oscilloscope-like waveform decay
Waveform compare	Waveform reference with automatic Pass/Fail testing
DMM Specification
Meter inputs	BNC inputs function as DMM input
Maximum resolution	999 counts
Measurements	VDC, VAC rms, VAC + DC rms, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory	Screen + Setup: 30
Memory	Recording: 10
Display	153 mm full color LCD with fast update rate
Environmental Specifications
Operating temperature	0°C to 40°C Including Batteries
Operating temperature	0°C to 50°C Excluding Batteries
Storage temperature	-20°C to +60°C
Operating altitude	Up to 2,000 m (6666 ft) for CAT IV 600 V/ CAT III 1000 V
Operating altitude	Up to 3,000 m (10,000 ft) for CAT III 600 V/ CAT II 1000 V
Safety Specifications
Electrical safety	1,000 V CAT III/600 V CAT IV (EN61010-1)
Mechanical and General Specifications
Size	270 x 190 x 70 mm
Weight	2.2 kg
Warranty	Three-years on main instrument
Li-Ion battery	BP 291 (4800mAh)
Included Accessories
	VPS410 Voltage Probe Sets (one red, one blue)
	BC190 Battery Charger/mains Adapter
	BP291, 4800 mAh Li-Ion battery
	Handstrap (affixed to instrument)
	Hangstrap
	Multi-Language User Manuals on CD-Rom
	FlukeView ScopeMeter® demo package (restricted functionality)
	USB Interface Cable
Warranty	One year on accessories