Tiếng Việt
SPECIFICATIONS GW INSTEK MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES
Channels: 2CH+ EXT.
Bandwidth(‐3dB): DC~100MHz
Rise time: 3.5ns
Bandwidth Limit: 20MHz
– AWG Specifications GW Instek MDO-2102AG
Channels: 2
Sample Rate: 200 Msa/s
Vertical Resolution: 14 bits
Max. Frequency: 25 MHz
Waveforms: Sine, Square, Pulse, Ramp, DC, Noise, Fall, Haversine, Cardiac
Output Range: 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω
Output Resolution: 1mV
Output Accuracy: 2% (1 kHz)
Offset Range: ±2.5 V, HighZ;±1.25 V, 50 Ω
Offset Resolution: 1mV
Frequency Range: 100mHz to 25MHz
Flatness (relative to 1kHz): ±0.5 dB<15MHz; ±1 dB:15MHz~25MHz
Harmonic Distortion: ‐40 dBc
Stray (Non‐harmonic): ‐40 dBc
Total Harmonic Distortion: 1%
S/N Ratio: 40 dB
Frequency Range: 100 MHz to 15MHz
Rise/Fall time: <15ns
Overshoot: <3%
Duty cycle: Square:50%;Pulse:0.4%~99.6%
Min. Pulse Width: 30 ns
Jitter: 500 ps
Frequency Range: 100mHz~1MHz
Linearity: 1%
Symmetry: 0 to 100%
– Frequency Response Analysis GW Instek MDO-2102AG
Dynamic Range: > 80 dB (typical)
Input and Output Sources: Channel 1 or 2
Frequency Range: 20 Hz to 25 MHz
Number of Test Points: 10 to 90 points per decade
Test Amplitude: 20 mVpp to 5 Vpp into High‐Z; Fixed test amplitude or custom amplitude for each decade
Test Results: Logarithmic overlaid gain and phase plot
Manual Measurements: Two pairs of tracking gain and phase markers
Plot Scaling: Auto‐scaled during a test
– Miscellaneous
Multi‐language menu: Available
operation environment: Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
On‐line help: Available
Time clock: Time and Date ,Provide the Date/Time for saved data
Dimensions: 384mmX208mmX127.3mm
Weight: 3kg
Introduction GW Instek MDO-2102AG
MDO-2000A is an advanced version of MDO-2000E. The selectable bandwidth range is upgraded to 300MHz. The full bandwidth ranges include 300MHz, 200MHz, and 100MHz. The sampling rate has upgraded to Max. 2GSa/s and the memory depth has also been upgraded to 20M/CH. Hence, the three major specifications of oscilloscopes have been improved. The new models of the series feature 2 channels including MDO-2000A and MDO-2000AG. The entire series offers the functions of an oscilloscope and spectrum analyzer. On top of that, MDO-2000AG features a dual-channel 25MHz arbitrary waveform generator. The new generation MDO-2000A series provides a better sampling rate and memory depth for users to obtain more realistic signal integrity, and higher bandwidth selections meet the measurement requirements of higher frequencies.
Features
– 300/200/100MHz bandwidth selections;2 channels
– Real-time sampling rate is 2GSa/s max.
– Per Channel 20M memory depth and VPO waveform display technology
– Waveform update rate up to 120,000 wfms/s
– 8 “ WVGA TFT LCD display
– Maximum 1M FFT provides higher frequency domain resolution measurements
– High, low and bandpass filter functions (GW Instek MDO-2202AG)
– 29,000 segmented memories and waveform search functions
– I2C/UART/CAN/LIN serial bus trigger and decoding function
– Datalog function is able to track signal changes up to 1000 hours
– Network storage function
– Mask test function
– MDO-2000AG equips with a dual channel 25MHz AWG
Review GW Instek MDO-2102AG MIXED-DOMAIN OSCILLOSCOPES
There are no reviews yet.