Tiếng Việt
SPECIFICATIONS TECHNICAL ARC PLASMA 56I INVERTER
| Output power range | 20-50A |
| Supply voltage | 230V 1ph |
| Duty cycle | 50A@40% |
| Input fuse recommended (slow) | 16A |
| Recommended min generator | 6kva |
| Size approx | 450x360x210 |
| Weight approx | 13kg |
| Torch | 6M CB50 |
| Min air requirements | 4.5 bar 150l/min |
| Max severance cut (very slow) | 17mm |
| Max recommended cut steel | 13mm |
| Max rec cut stainless S & alum | 10mm |
Introduction Technical ARC Plasma 56i Inverter
Plasma 56i is a well tried & tested plasma cutter used in all industries around Europe.
We have now replaced this model with the latest technology Plasma X5 Dual voltage, the updated model offers better performance in every way for a similar price.
Our plasma 56i is one of the most popular models in our range with 100’s sold over the last few years. Good cutting performance combined with the lowest running costs possible & excellant reliability make this the ideal machine for light to medium duty cutting applications.
We have now replaced this model with the latest technology Plasma X5 Dual voltage, the updated model offers better performance in every way for a similar price.
Standard features
- Infinitely variable output power up to 50A.
- Pilot arc fitted to pierce through paint & rust etc.
- Super fine narrow cut.
- Low cost Trafimet CB50 torch fitted.
- 230V single phase supply 16A recomended, 13A up to 3/4 power.
- High duty cycle to cope with demanding applications.
- High efficiency so uses less electric than many other machines.
- Fan on demand circuit fitted so only runs when needed.
- Generator friendly.
- Engineer friendly (these machines can easily be maintained)
Built to comply with BS EN 60974-1, CE marked, RoHS compliant and WEEE registered so you can be sure of the safety & quality.
Options
Longer torch.
Circle cutting kit.
Extended torch consumables to get into tight spaces.
We guarantee to fully support these models with spares & service for a minimum of 10 years.
The best back up in the industry!
Review Technical ARC Plasma 56i Inverter
There are no reviews yet.