Mitutoyo Moving Column Surface Roughness Tester – Surftest Extreme SV-M3000CNC

Surftest Extreme SV-M3000CNC is a Moving Column Surface Roughness Tester.

Features

A CNC Surface Roughness Tester that covers the measurement of large/heavy workpieces such as engine blocks, crankshafts, etc.
The X1, Y and Z2 axes have a maximum drive speed of 200mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile / multiple workpiece measurement tasks.
A highly accurate surface roughness tester featuring column (Z2 axis) CNC drive. This allows comprehensive surface roughness measurement on large and heavy workpieces that cannot otherwise be tested except by using a compact surface roughness tester (handy-type).
A large rotary table (option) with a loading capacity of 100kg is available by special order.
Measuring force for the Z1-axis detector is selectable from 4mN or 0.75mN.

The following three types of detector are available to suit the intended use.

Standard type (downward facing)
Long type (downward facing, particularly suitable for measurement of deep holes, etc.)
Rotary type (orientation indexable for downward, upward, forward and backward facing

Mitutoyo Surftest Extreme SV-M3000CNC Moving Column Surface Roughness Tester

Manufacturer: Mitutoyo
Model: SV-3000CNC, SV-M3000CNC
The X1, Y, and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.

The X1, Y, and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.
Capable of inclined plane measurement through 2-axis simultaneous control in X and Y.
For models equipped with the α axis, it is possible to perform continuous measurements over horizontal and inclined surfaces by power-tilting the drive unit.
It is possible to expand the measuring range for multiple workpieces through positioning in Y.
All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.
Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will automatically stop if it touches a workpiece or fixture.
Surftest Extreme SV-M3000CNC (CNC Surface Roughness Tester with a movable Y-axis table) that handles measurement of large/heavy workpieces, such as engine blocks or crankshafts, is also available.
An optional external control function (Ext I/O) through bidirectional communication (RS-232C) with the PLC (programmable logic controller) is available.