SANWA PC7000 DIGITAL MULTIMETERS

SPECIFICATIONS SANWA PC7000 DIGITAL MULTIMETERS

DCV

Input impedance: 10MΩ

Measuring range: 500m/5/50/500/1000V

Best accuracy: ±(0.03%+2)

Resolution: 0.01mV

ACV

Input impedance: 10MΩ

Measuring range: 500m/5/50/500/1000V

Best accuracy: ±(0.5%+40)

Resolution: 0.01mV

DCA

Measuring range: 500μ/5000μ/50m/500m/5/10A

Best accuracy: ±(0.1%+20)

Resolution: 0.01μA

ACA

Measuring range: 500μ/5000μ/50m/500m/5/10A

Best accuracy: ±(0.6%+40)

Resolution: 0.01μA

Resistance

Measuring range: 500/5k/50k/500k/5M/50MΩ

Best accuracy: ±(0.2%+6)

Resolution: 0.01Ω

Conductance

Measuring range: 99.99nS

Best accuracy: ±(1.0%+10)

Resolution: 0.01nS

Capacitance

Measuring range: 50n/500n/5μ/50μ/500μ/5m/25mF

Best accuracy: ±(0.8%+3）※

Resolution: 0.01nF

Temperature

Measuring range: -50～1000°C (thermocouple K type)

Best accuracy: ±(0.3%+20)

Resolution: 0.1°C

Frequency

Measuring range: 10Hz～200kHz

Best accuracy: ±(0.02%+40)

Resolution: 0.001Hz

Logic frequency

Measuring range: 5Hz～2MHz

Best accuracy: ±(0.002%+4)

Resolution: 0.001Hz

Duty cycle

Measuring range: 0.1%～99.99%

Best accuracy: ±(3d/kHz+2)

Resolution: 0.01%

dBm

Measuring range: -29.83dBm～54.25dBm

Best accuracy: ±(0.25dB+2)

Resolution: 0.01dB

4-20mA%

Measuring range: 4mA=0%; 20mA=100%

Best accuracy: ±25d

Resolution: 0.01%

Continuity: Buzzer sounds at between 20Ω and 200Ω Open voltage:approx.1.3

Diode test: Open voltage:approx.3V

Introduction Sanwa PC7000 Digital Multimeters

Sanwa PC7000 – has all the features of a digital multimeters product. This is a device that is no stranger to those who work in the field of electronics, maintenance, …. Because this device fully converges the power measurement features that users are looking for.

Features: Sanwa PC7000

– Compliant with IEC61010-1 CAT. III 600 V, CAT. II 1000 V, and safe design using fuses with large number of breaking capacity.
– 50000-count display (DCV, ACV, DCA, ACA, Ohm)
– 500000-count display (DCV)
– 99999-count display (Hz)
– Fast response display (Numeric parts: 5 times/Sec. Bar graph part: 60 times/Sec. where 50000-count display mode)
– Dual Display shows “Voltage or Current and its Frequency”, and “AC components and DC components of Voltage or Current”
– True RMS detection for alternate current (AC) (True RMS)
– DC+AC indications available
– Low-pass filter for Variable Frequency Drive (VFD) circuit
– dBm indication for decibel measurement
– Resolution: 0.001 mV for DCV, 0.01 mV for ACV
– Frequency (Sensitivity selectable), Wide capacitance range (0.01 nF to 25.00 mF)
– Automatically range selectable Crest Capture Mode. Sampling time: Approx. 0.8 ms
– MAX/MIN/AVG recording mode with auto ranging
– Relative mode with auto ranging
– Back light to allow for easy visibility in low-lit area
– Temperature measurement (K-type thermocouple: –50 °C to 1000 °C )
– PCLink7 (separately available software) allows you to download logged data into your PC with USB optical communication unit (KB-USB7)