Mitutoyo Surftest Extreme SV-3000CNC – CNC Surface Roughness Measuring Machine

Surftest Extreme SV-3000CNC is a CNC Surface Roughness Measuring Instrument.

Features

The X1-, Y- and Z2-axes have a maximum drive speed of 200mm/s, which permits high-speed positioning that may result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.
For models with the Y-axis table, it is possible to perform inclined plane measurements through 2-axis simultaneous control in the X- and Y-axis directions.
For models with the a-axis drive, it is possible to perform continuous measurement over horizontal and inclined surfaces by power-tilting the X1 axis.
For models with the Y-axis table, it is possible to expand the measuring range for multiple workpieces, etc., through positioning in Y.
Measuring force for the Z1-axis detector is selectable from 4mN or 0.75mN.

Mitutoyo Surftest Extreme SV-3000CNC – CNC Surface Roughness Measuring Machine

Manufacturer: Mitutoyo
Model: SV-3000CNC, SV-M3000CNC
The X1, Y and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.

The X1, Y and Z2 axes have a maximum drive speed of 200 mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile/multiple-workpiece measurement tasks.
Capable of inclined plane measurement through 2 axis simultaneous control in X and Y.
For models equipped with the α axis, it is possible to perform continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.
It is possible to expand the measuring range for multiple workpieces through positioning in Y.
All connecting cables are contained within the measuring instrument to eliminate any inconvenience during measurement.
Since the Z1-axis detector incorporates an anti-collision safety devide, the detector unit will automatically stop if it touches a workpiece or fixture.
Surftest Extreme SV-M3000CNC (CNC Surface Roughness Tester with a movable Y-axis table) that handles measurement of large/heavy workpieces, such as engine blocks or crankshafts, is also available.
Optional external control function (Ext I/O) through bidirectional communication (RS-232C) with the PLC (programmable logic controller) is available.