Tiếng Việt
Fluke 729 Pro Automatic Pressure Calibrator
Product Overview
Fluke 729 Pro Automatic Pressure Calibrator not only simplifies pressure calibration but saves time, reduces errors and improves accuracy. With plug-in replaceable pressure control modules and pressure generation and regulation up to 1000psi, 7Mpa.
Specifications: Fluke 729 Pro Automatic Pressure Calibrator
| Key parameters | 729 Pro 7M | 729 Pro 4M |
| Pressure control range | -13 to 1000 psi, -90 to 7000 kPa, -0.90 to 70 bar |
-13 to 600 psi, -90 to 4000 kPa, -0.90 to 40 bar |
| Pressure type | Gauge/absolute (Depends on the type of internal or external pressure module | |
| Pressure accuracy and Control stability | 0.02% of FS, 0.005% of FS | |
| Replaceable pressure measurement modules | Yes, 6 modules | Yes, 4 modules |
| mA sourcing/measurement | Yes | |
| Voltage measurement | Yes | |
| Loop power | 24 V dc | |
| Pressure switch testing | Yes | |
| Pressure leakage testing | Yes | |
| HART Communication | Yes, basic commands supported | |
| Autostep / auto ramp | Yes (with customizable speed, mode and style) | |
| Battery | Rechargeable lithium battery with charge indication (charged in the instrument or separately) | |
| Language | English | |
| Electrical specification | |
| All specifications are valid to 110% of range, except 24 mA source and simulate which are valid to 100% of range. | |
| Ranges | |
| mA measure, source and simulate | 0 mA to 24 mA |
| Volts dc measurement | 0 V dc to 30 V dc |
| Resolution | |
| mA dc source, simulate and measure | 1 μA |
| Voltage dc measurement | 1 mV |
| Accuracy | 0.01% FS ±2 LSD all ranges (at 23 °C ±5 °C) |
| Stability | 20 ppm FS /°C (-10 °C to +18 °C and 28 °C to 50 °C) |
| mA simulation working voltage | 12 V dc to 30 V dc |
| Loop compliance voltage | 24 V dc @ 20 mA |
| Temperature measurement , 100 Ω Pt(385) RTD | -50 °C to 150 °C |
| Temperature resolution | 0.01 °C |
| Temperature accuracy | ±0.1 °C ±0.25 °C combined uncertainty when using 720 RTD probe (optional accessory) |
| Drive capability (mA source) | 1200 Ω (without HART resistor), 950 Ω (with internal HART resistor) |
| Mechanical specification | |
| Dimension (HxWxL) | 290 x 215 x100 mm, (4.3 x 4.4 x 9.4 in) |
| Weight | 4.9 kg, (10.8 lbs) |
| Environmental specification | |
| Operating temperature | -10 °C to 50 °C |
| Pressure control | 0 °C to 50 °C |
| Battery charging | 0 °C to 40 °C |
| Storage temperature | -20 °C to 60 °C |
| Operating altitude | <3000 m |
| Storage altitude | <13000 m |
| Operating humidity | Non-condensing (<10°C) ≤90 % RH (10 °C to 30 °C) ≤75 % RH (30 °C to 40 °C) ≤45 % RH (40 °C to 50 °C) |
| Pressure Module Selection Table | ||||||
| Pressure module | Pressure type | Range | Resolution | Overall uncertainty | 729Pro 4M | 729Pro 7M |
| FLK-PMM-200K | Gauge | (-15 to 30) psi | 0.0001 psi | 0.02 % FS / year, maximum | • | • |
| (-100 to 200) kPa | 0.001 kPa | |||||
| (-1 to 2) bar | 0.00001 bar | |||||
| FLK-PMM-200KA | Absolute | (0 to 30) psi | 0.0001 psi | 0.05 % FS / year, maximum | • | • |
| (0 to 200) kPa | 0.001 kPa | |||||
| (0 to 2) bar | 0.00001 bar | |||||
| FLK-PMM-2000K | Gauge | (-13 to 300) psi | 0.001 psi | 0.02 % FS / year, maximum | • | • |
| (-90 to 2000) kPa | 0.01 kPa | |||||
| (-0.90 to 20) bar | 0.0001 bar | |||||
| FLK-PMM-4000K | Gauge | (-13 to 600) psi | 0.01 psi | 0.02 % FS / year, maximum | • | • |
| (-90 to 4000) kPa | 0.01 kPa | |||||
| (-0.90 to 40) bar | 0.0001 ba | |||||
| FLK-PMM-7000K | Gauge | (-13 to 1000) psi | 0.01 psi | 0.02 % FS / year, maximum | • | |
| (-90 to 7000) kPa | 0.01 kPa | |||||
| (-0.90 to 70) bar | 0.0001 ba | |||||
| FLK-PMM-7000KA | Absolute | (0 to 1000) psi | 0.01 psi | 0.02 % FS / year, maximum | • | |
| (0 to 7000) kPa | 0.01 kPa | |||||
| (0 to 70) bar | 0.0001 ba | |||||
| Dry air or non-corrosive gases only / 15 °C to 35 °C, all ranges | ||||||
Review Fluke 729 Pro Automatic Pressure Calibrator
There are no reviews yet.