SLS 1040 Syringe Liquid Particle Sampler

Introduction Syringe Liquid Particle Sampler PMS SLS 1040

The PMS SLS 1040 Syringe Sampling System enables safe, accurate and efficient testing of particle levels in liquid laboratory samples and process chemicals. Precision is achieved through accurate control of a syringe and simple flow-path for delivering liquid samples from a sample vessel or chemical container directly to the particle sensor. The SLS 1040 features an on-board UltraChem 40 particle sensor, which uses PMS patented NanoVision Technology® to measure particles as small as 40 nm in a wide variety of process chemicals. It is ideal for applications where efficient sampling of chemicals or lab samples is required, with the sampler contributing zero contamination to the chemical sample. The system consists of a selectable syringe for either corrosive or non-corrosive liquids, a selectable particle sensor for different sizing sensitivities, and batch sampling software.

Benefits Syringe Liquid Particle Sampler SLS 1040

• Precisely measures particles as small as 40 nm
• Versatile system allows selection of various particle sensors and syringe sizes
• Eliminates sample waste with a small sample volume
• Cost-effective
• Easily configurable

Syringe size	1, 5, 10 (standard) 25 ml
Sampling mode	Vacuum, batch
Minimum sample size	0.4 ml, 20 ml/min
Wetted surface materials	Glass, Teflon® (all Teflon optional)
Power	100 – 240 V, 50 – 60Hz
Sample volume	Adjustable using software interface
Maximum pressure	25 psi
Dimensions (l, w, h)	38.1 x 22.0 x 43.4 cm, including particle counter
Weight	19.1 kg  including particle counter
Environment Temperature	10 – 30 ºC
Humidity	Non-condensing
Particle Sensor	UltraChem 40
Particle Size Range	40 – 125 nm
Channels	40, 70, 125 nm
Flow rate	5 ml/min
Sampled %	40% Monitor mode; 20% Spectrometer mode and High-Scatter
Maximum concentration	2,500 particles/ml, Monitor mode and Spectrometer mode 15,000 particles /ml, High-Scatter mode
Zero count	< 20 counts/l
Sample temperature	50 – 122 °F (10 – 50 ºC)
Calibration	Materials used are traceable to US National Institute of Standards and Technology (NIST) and Japanese Institute of Standards (JIS).
Software	SamplerSight

Applications