HIOKI 3284 CLAMP ON AC/DC HiTESTER

SPECIFICATIONS HIOKI 3284 CLAMP ON AC/DC HiTESTER

• DC Current range

20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.

• AC Current range

20.00/ 200.0 A (10 Hz to 2 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.3 % rdg. ±3 dgt.

• DC Voltage range

30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.

• AC Voltage range

30.00 V to 600 V, 3 ranges (10 to 1 kHz, True RMS),
Basic accuracy 45-66 Hz: ±1.0 % rdg. ±3 dgt.

• Crest factor

2.5 or less (1.5 at 200 A, 1.7 at 600 V)

• Monitor, Analog output

DC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz bandwidth (±3dB)

• Resistance, Continuity check: N/A
• Frequency range

1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.

• Other functions

AC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero

• Display

Display refresh rate: 4 times/s (FAST), 1 time/3s (SLOW), 4 times/s (bar graph)

• Power supply

6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02/-03

• Core jaw dia.

φ 33 mm (1.30 in)

• Dimensions and mass

62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)

• Accessories

Test Lead L9207-10 ×1, Carrying Case 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction manual ×1

Introduction Hioki 3284

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The 3284 is an AC/DC current and voltage clamp meter with analog output capabilities and a peak hold function.

Features

– Analog output for current measuring level, current measuring waveform, or frequency measuring level.

– Peak hold function displays the crest value of the inrush current occurring when electrical equipment starts

– AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms