Minebea TGI-10kN Tension And Compression Testing Machine

SPECIFICATIONS MINEBEA TGI-10kN TENSION AND COMPRESSION TESTING MACHINE

Maximum test force:

250 kN, 100 kN, 50 kN, 10 kN, 5 kN, 1 kN, 500 N, 200 N

Test space:

Tensile and Compression testing beneath the movable crosshead.
(An optional model is available allowing tensile testing above the movable crosshead.)

Loading method:

Constant-speed strain loading with high-accuracy AC servo motor and backlash-free precision ball screw

Crosshead speed/permissible test force:

Within the max. test force over the entire speed ranges.

Test force range:

Choice of ×1 (AUTO) and ×100 if load cell rated output is 3 mV/V; ×1 (AUTO) if load cell rated capacity is 20 N or less.
When ×1 (AUTO) is set: test force increase/decrease, full scale display, and automatic switching of decimal point position and display units

Test force measuring accuracy:

±1% of indicated value in range 1/1 to 1/500 of load cell capacity for both tensile and compression (A high-accuracy model with ±0.5% of indicated value is available as an option.)

Applicable standard:

JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5

Crosshead speed accuracy:

±0.5% of speed setting or ±0.0025 mm/min, whichever is larger

Speed setting method:

Manual: Numeric input via control panel (0.1, 0.5, 1 to 500 set in 1 mm/min increments)
When using data processing software: Automatically set in accordance with test conditions created.

Manual speed:

3 speeds (HIGH/MIDDLE/LOW); each speed freely settable

Test mode:

Single and cycle (combination of test force and position) Optional: Creep, stress relaxation, automatic loading

Display:

5-digit digital display ±99,999, able to display peak or rupture test force, position: 5 1/2 digital display ±1999,999

Standard functions:

Load Cell model and capacity: Auto adjust

Load Cell span: Auto set for tension/compression.

Load Cell Zero point: One push

Position reset: One push

Sample rupture detection: Selectable from stop, reverse and ignore

Rupture sensitivity: Set as desired to 0.04 % to 99.00 % of test force

Test condition registration function: 10 conditions

Test force & position analog output: 0 VDC to 5 VDC (with scaling function)

Interface: Conforms to USB 2.0/1.1 standard (B-type connector)

Options:

Chuck adapter: Lower chuck mounting adapter for tensile testing

Load Cell: for tension/compression type (with universal joint, connect pin, and compression plate)

for tensile type (with universal joint and connecting pin)

for compression type (with compression plate)

Testing: Former jig is attachable.

Displacement measuring function: Strain input type

Test machine stand:

Data processing software: Single, Cycle, Control

Power supply voltage, Frequency

TGI-250kN~TGI-10kN:3-phase 200 VAC±20 VAC, 50/60 Hz
TGI-5kN~TGI-200N: Single phase 100 VAC ~ 115 VAC, 50/60 Hz

Operating temperature /humidity range

Temperature 5 ℃ ~ 40 ℃, Humidity 20 % ~ 80 %RH (Non condensing)

Notes

Note 1: The test force measurement range varies depending on the rated capacity of the load cell used.
Note 2: Testing machines are available with large effective width for models with maximum test force of 50 kN, 100 kN or 250 kN.
Note 3: Models are available with extended stroke.
Note 4: Tensile testing stroke is for maximum test force capacity load cell with the (optional) chuck mounted.

Introduction Minebea TGI-10kN Tension And Compression Testing Machine

The Minebea TGI-10kN Tension and Compression Testing Machine is a high-performance testing instrument designed for accurately measuring the tensile and compressive properties of various materials. Manufactured by Minebea, a leading company in precision machinery and measurement equipment, the TGI-10kN is known for its reliability, precision, and advanced features.

Features 

•New Desk-Top testing mashine with high accuracy, high performance, and simple operation.

■ High Accuracy

Accuracy of ±1 % (JIS Class 1) of the indicated value from 1/1 to 1/1000 of load cell capacity, accuracy of ±0.5% (JIS Class 0.5) is available as an option.

Cross head speed range of 0.000 5 mm/min to 1 000mm/min (TGI-50kN to TGI-250kN : 0.000 5mm/min to 500mm/min).

Accuracy of cross head speed is ±0.1 % of speed setting over entire speed range.

■ High performance with simple operation.

Automatic load cell span adjustment, One-push auto zero, Auto return to test start position (No overshooting), Test condition registration, Manual 3 level speed setting (freely settable), Analog output of test force and position, and support for continuous repeated tensile and compression testing.

■ Increased accuracy,

With servo motor resolution four times greater than previous models. Position control is greatly improved, allowing steady operation in low speed ranges.

■ Increased return speed

The return speed can be set as desired between 0.1 mm/min and 1500 mm/min (up to 10kN) and between 0.1 mm/min and 750mm/min (for 50kN and over).