KYORITSU 4102A EARTH TESTERS

Key Features

The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
Dust and drip proof. (designed to IEC 529 IP54)
Earth resistance value can be read directly from the scale.
Capable of measuring earth voltage.
Small and lightweight. Shock resistant new case material.
2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by “OK” lamp. Lead wire connection to C and E terminals is good when “OK” lamp is illuminated.

Description
Additional information

SPECIFICATIONS KYORITSU 4102A EARTH TESTERS

Measurement ranges

Earth Resistance: 0 – 12 Ω/0 – 120 Ω/0 – 1200 Ω
Earth Voltage [50,60Hz]: 0 – 30V AC

Accuracy

Earth Resistance: ±3% of full scale
Earth Voltage: ±3% of full scale

Overload protection

Earth Resistance: 276V AC for 10 seconds
across 2 of the 3 terminals
Earth Voltage: 276V AC for 1 minute

Applicable standards

IEC 61010-1 CAT III 300V Pollution Degree 2, IEC 61557
IEC 60529 IP54

Power source

R6 (AA) (1.5V) × 6

Dimensions

105(L) × 158(W) × 70(D)mm

Weight

600g approx.

Included Accessories

7095A (Earth resistance test leads) × 1set
(red-20m, yellow-10m, green-5m)
8032 (Auxiliary earth spikes) × 1set
7127B (Simplified measurement probe)
R6 (AA) × 6
9121 (Shoulder strap)
Instruction Manual
Carrying case : 9084(Carrying case[Soft]:4102A only)
: 9164(Carrying case[Hard]:4102A-H only)

Optional Accessories

7245A (Precision measurement cord set)
8259 (Adapter for measurement terminal)

Introduction Kyoritsu 4102A Earth Testers

The instrument is an earth resistance tester for testing power distribution lines, in-house wiring system, electrical appliances etc. It also has an earth voltage range for earth voltage measurement.

Features

• The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
• Dust and drip proof. (designed to IEC 529 IP54)
• Earth resistance value can be read directly from the scale.
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.
• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
• Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by “OK” lamp. Lead wire connection to C and E terminals is good when “OK” lamp is illuminated.