Máy đo nhiệt độ độ ẩm môi trường Kimo HD50 (-20 … +70°C, 5 … 95%RH)

may-do-nhiet-do-do-am-moi-truong-kimo-hd50-01

Máy đo nhiệt độ độ ẩm môi trường Kimo HD50 (02)

Máy đo nhiệt độ độ ẩm môi trường Kimo HD50 (03)

KIMO HD50: Temperature And Humidity Meter

Key Features

Dual capabilities – tests the temperature and humidity levels in the air
Built-in sensor
Temperature measurement range from -20 to +70°C
Humidity measurements range from 5 to 95% RH
HOLD function temporarily stores the current value on the screen

Description
Additional information

specifications KIMO HD50: Temperature And Humidity Meter

Measuring Units: Temperature: °C, °F; Humidity: %RH

Measurement Range: Temperature: From -20 to +70°C; Humidity: From 5 to 95% RH

Accuracy: Temperature: ±0.4% of reading ±0.3°C; Humidity: Accuracy* (Repeatability, Linearity, Hysteresis): ±1.8% RH (from 15 to 25°C). Uncertainty adjustment in the factory: ±0.88% RH. Drift linked to temperature: ±0.04 x (T-20) % RH (if T<15°C or T>25°C)

Resolution: Temperature: 0.1°C; Humidity: 0.1 RH

Response Time: Temperature: T63 = 5s; Humidity: T63 = 4s

Operating Temperature: From -10 to +50°C

Storage Temperature: From -20 to +70°C

Measuring Elements: Digital sensor CMOS

Power Supply: 4 x AAA LR03, 1.5V batteries

Battery Life: 100 hours

Conformity: Directives CEM 2004/108/CE and NF EN 61010-1

Supplied with: Instruments are supplied with an adjustment certificate and a soft case.

Introduction

Test the air humidity and temperature with reliable, accurate results by using KIMO’s HD50 thermo-hygrometer!

Featuring a permanently attached temperature and humidity sensor, the HD50 can test temperature levels from -20 to +70°C and humidity levels from 5 to 95% RH. Using the meter is simple – just hold it up in the area you want to test and it’ll measure either temp or humidity (parameters are measured separately).

Need to jot down a measurement? No problem – just hit the HOLD button and the HD50 will temporarily store the current value shown on the screen! You can also switch between Celsius and Fahrenheit measurement modes with another simple few button presses.

This thermo-hygrometer includes a 1-year guarantee against manufacturing defects from KIMO.

Features Kimo HD50

– Dual capabilities – tests the temperature and humidity levels in the air
– Built-in sensor
– Temperature measurement range from -20 to +70°C
– Humidity measurements range from 5 to 95% RH
– The HOLD function temporarily stores the current value on the screen
– 100-hour battery life (4 x AAA)
– Automatic shut down after 20 minutes to save battery
– IP54 rated
– 1-year guarantee