Tiếng Việt
SPECIFICATIONS MITUTOYO 500-713-20 DIGIMATIC CALIPER ABSOLUTE COOLANT PROOF
Introduction Mitutoyo 500-713-20 Digimatic Caliper ABSOLUTE Coolant Proof
The Mitutoyo 500-713-20 ABSOLUTE Coolant Proof Caliper Series 500 with Dust/Water Protection. It will help speeds up your workflow and dramatically reduces measurement errors related to repeated zeroing in workspaces where exposure to coolant, oil, water, or prolific dust is expected. It is dustproof, complies with EN60529 and withstands temporary complete immersion in water without suffering any damage. It is easy-to-use and no need to wipe or clean the scale.
You can set an absolute zero point for the calipers to remember. So you don’t have to zero them again and again. The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. The same switch lets you return to the absolute (ABS) coordinate and display the true position from the origin point (jaws-closed, or wherever you set yours).
Features Mitutoyo 500-713-20 Digimatic Caliper ABSOLUTE Coolant Proof
- ABS Coolant Proof Caliper with Dust/Water Protection conforming to IP67 Level. Can be used in workshop conditions exposed to coolant, water, dust or oil. 100% air-leak test ensures every caliper conforms to IP67
- Large characters on the display provide better visibility, and hige-contrast LCD reduces eyestrain
- Battery cao does not require a screw driver for battery replacement ( except for 0-300 mm/ 0-12 inch models)
- Extended battery life of 5 years due to low current integrated circuit ( except for 0-300 mm/ 0 -12 inch models)
- Easy to use – advanced ergonomic design uses only 1 button
- Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
- The automatic power-on/off function shuts down the LCD display after 20 minutes inactivity, but the ABS scale origin is unaffected.
- Power is restored to the display when the slider is moved
- Stepped features can be measured
- Can be integrated into statistical process control and measurements systems.
- An inspection certificate is supplied as standard (However, this cannot be used as a calibration certificate as it is undated.)
Mitutoyo Brand
Mitutoyo was founded by Japanese Yehan Numata in 1934. Mitutoyo now offer a full line of more than 5,500 metrology tools, instruments and equipment to provide customers every metrology solution from one company. Mitutoyo provides measurement solutions for the Aerospace, Automotive, Defense, Electronics, Energy, General Manufacturing, Medical, Plastics and Rubber industries
Review Mitutoyo 500-713-20 Digimatic Caliper Absolute Coolant Proof
There are no reviews yet.