Tiếng Việt
Technical ARC T-MIG Industrial compact MIG range 280A-460A – view more
SPECIFICATIONS Technical ARC T-MIG Industrial compact MIG range 280A-460A
+ Technical ARC T-MIG 301X & 303X
| 303X 400V
3 phase |
301X 230V
1 phase |
|
| Amps range | 20-300A | 20-300A |
| Volts steps | 16 | 16 |
| Duty cycle | 290A@35%
220A@60% |
290A@35%
220A@60% |
| Input fuse recommended(slow) | 16A | 32A |
| Recommended min generator size (¾ output) | 6kva | 7kva |
| Welding wire size range | 0.6 -1.2mm | 0.6 -1.2mm |
| Welding wire spool sizes | 15kg & 5kg | 15kg & 5kg |
+ Technical ARC T-MIG 281HD & 283HD
| 283HD 400V
3 phase |
281HD 230V
Single phase |
|
| Amps range | 20-300A | 20-300A |
| Volts steps | 16 | 16 |
| Duty cycle
|
255A@60%
300A@45% |
255A@60%
300A@45% |
| Input fuse recommended (slow) | 16A | 25/32A |
| Recommended min generator size (¾ output) | 6kva | 6.5kva |
| Welding wire size range | 0.6 -1.2mm | 0.6 -1.2mm |
| Welding wire spool sizes | 15kg & 5kg | 15kg & 5kg |
+ Technical ARC T-MIG 321HD & 323HD
| 323HD 400V
3 phase |
321HD 230V
Single phase |
|
| Amps range | 20-340A | 20-340A |
| Volts steps | 16 | 16 |
| Duty cycle | 290A@60%
340A@45% |
290A@60%
340A@45% |
| Input fuse recommended (slow) | 16A | 32A |
| Recommended min generator size (¾ output) | 7kva | 8kva |
| Welding wire size range | 0.6 -1.2mm | 0.6 -1.2mm |
| Welding wire spool sizes | 15kg & 5kg | 15kg & 5kg |
+ Technical ARC T-MIG 361HD & 363HD
| 363HD 400V
3 phase |
361HD 230V
Single phase |
|
| Amps range | 20-380A | 20-380A |
| Volts steps | 32 | 24 |
| Duty cycle | 350A@60%
380A@50% |
350A@60%
380A@50%
|
| Input fuse recommended (slow) | 16/20A | 32/45A |
| Recommended min generator size (¾ output) | 9kva | 10kva |
| Welding wire size range | 0.6 -1.2mm | 0.6 -1.2mm |
| Welding wire spool sizes | 15kg & 5kg | 15kg & 5kg |
+ Technical ARC T-MIG 421HD & 423HD
| 423HD 400V
3 phase |
421HD 230V
1 phase |
|
| Amps range | 20-430A | 30-430A |
| Volts steps | 32 | 24 |
| Duty cycle | 380A@60%
420A@50% |
380A@60%
420A@50% |
| Input fuse recommended (slow) | 20/25A | 45/63A |
| Recommended min generator size (¾ output) | 12KVA | 14KVA |
| Welding wire size range | 0.6 -1.6mm | 0.6-1.6mm |
| Welding wire spool sizes | 15kg & 5kg | 15kg & 5kg |
+ Technical ARC T-MIG 463 HD
| 463HD 400V
3 phase |
|
| Amps range | 20-480A |
| Volts steps | 32 |
| Duty cycle | 440A@60%
480A@50% |
| Input fuse recommended (slow) | 25/32A |
| Recommended min generator size (¾ output) | 15kva |
| Welding wire size range | 0.6 -1.6mm |
| Welding wire spool sizes | 15kg & 5kg |
Introduction Technical ARC T-MIG Industrial compact MIG range 280A-460A
T-MIG models are designed and manufactured in Great Britain to the very highest industrial standards. Built to work hard every day, this no-nonsense MIG range has a reputation in the industry as a real workhorse. All T-MIG models offer the user the very best welding performance with minimal spatter and a soft stable arc throughout the range. At the heart of every machine is a large copper wound transformer & other heavy duty components all constructed in a robust powder coated steel case, this ensures these are probably the most solid & reliable range of compact MIGs available, with thousands sold over the last few years. We also have the best long term back up with all parts available for a minimum of 20 years
Environmentally friendly too! Made with less than 1% plastic materials + very long product lifespan + over 90% energy efficiency.
- T-MIG 3 phase 400V models are available from 280A-460A (3 phase model numbers finish ..3)
- T-MIG 1 phase 230V models are available from 280A-420A (1 phase model numbers finish ..1)
Approx size 710mm H x 850mm L x 380mm W (excluding width of rear wheels). Weight 85 to 135kg depending on model.
All models are manufactured to comply with BS EN 60974-1 & BS EN 60974-10
Also in full compliance with RoHS directive 2011/65/EU & weee directive 2012/19/EU
Features Technical ARC T-MIG Industrial compact MIG range 280A-460A
- Good range of volt steps for very fine adjustment of power
- Super smooth welding characteristics through the range.
- 100% copper wound transformer with 5 year warranty.
- Very high duty cycle.
- High efficiency of over 90% to minimise electric usage.
- Easy setting infinitely variable wire speed control.
- Torch trigger latching fitted as standard.
- Built in electronic burn back with adjustment.
- Industry standard euro torch connection.
- Can be used with all wire and spool sizes.
- The strongest steel case/chassis (3mm) of any compact MIG in the industry.
- Over 80% of supply chain value is of British origin.
- Large 250mm wheels & HD front casters
- Voltage switches have steel shafts not plastic like competitors.
- Quality wire drive system and powerful motor in all models.
- All HD models now have an all metal 4 roll drive as standard.
Options
Options include, special input voltage, dual voltage, different output or duty cycle, digital meters, etc. Optional fume extractor output 110V or 230V to suit most extractor units – mount your extractor on the machine & the T-MIG will power it directly. All models are also available in red or yellow on request.
From 2019 most models are HD (heavy duty 60%) & with 4 roll drive as standard.
T-MIG301X & 303X offer the same rugged build quality as the HD models but at a lower cost, lower duty cycle & 2 roll geared metal wire drive system.
We guarantee to fully support these machines with spares & service for a minimum of 20 years, the best long term back up in the industry!
‘Invest in the best’ quality made British welding equipment – made to last 25+ years.
Superb welding performance combined with rugged reliable build & the lowest long term maintenance in the industry, we guarantee you will be delighted!
Reviews
There are no reviews yet.