Tiếng Việt
SPECIFICATIONS FLUKE 302+ CLAMP METER
- Electrical Specifications
AC Current (Jaw)Range: 400.0 A
Resolution: 0.1 A
Accuracy:
1.8 % ±5 digits (45 Hz to 65 Hz)
2.5 % ±5 digits (65 Hz to 400 Hz)
AC Voltage
Range: 600.0 V
Resolution: 0.1 V
Accuracy: 1.5 % ± 5 digits (45 Hz to 400 Hz)
DC Voltage
Range: 600.0 V
Resolution: 0.1 V
- Mechanical Specifications
- Environmental Specifications
– Operating Temperature: 0 °C to +40 °C
– Storage Temp: -30 °C to +60 °C
– Operating Humidity:Non condensing (<10 °C)
≤90 % RH (at 10 °C to 30 °C)
≤75 % RH (at 30 °C to 40 °C)
(Without Condensation)
– Operating Altitude: 2000 meters
– Storage Altitude: 12,000 meters
– EMI, EMC: Meets all applicable requirements in EN/IEC 61326-1
– Electromagnetic Compatibility:
Applies to use in Korea only. Class A Equipment
(Industrial Broadcasting & Communication Equipment)*
* This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.
– Temperature Coefficients: Add 0.1 x specified accuracy for each °C above 28 °C or below 18 °C
– Measurement Category: CAT IV 300 V, CAT III 600 V
– Safety Compliance:
EN/IEC 61010-1, Pollution Degree 2
EN/IEC 61010-2-032
EN/IEC 61010-031
– IP Rating: IP 30 Per IEC 60529; Non-operating
– Batteries: 2 AAA, NEDA 24A, IEC LR03
Introduction Fluke 302+
The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time.
Features Fluke 302+
- The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
- Measure AC current up to 400A
- 30 mm large jaw
- High accuracy of 1.8%
- Backlit display
Fluke 302+ Comes with Fluke TL75 Hard Point™ Test Lead Set
- One pair (red, black) of comfort grip probes
- 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- CAT II 1000 V, 10 A rating
- CAT IV 600 V, CAT III 1000 V only with protective cap
Fluke 302+ Safety Features
- Meets CAT IV 300V/CAT ||| 600V safety rating
Review FLUKE 302+ CLAMP METER
There are no reviews yet.