APC Easy UPS SRV1KI (On-Line, 1000VA/800W, Tower, 230V, 3x IEC C13 outlets, Intelligent Card Slot, LCD)

SPECIFICATIONS APC EASY UPS SRV1KI 

+ Overview

Presentation: High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions. 

Lead time: Usually in Stock 

+ Main

Main Input Voltage: 230 V

Other Input Voltage:

220 V
240 V

Main Output Voltage: 230 V

Other Output Voltage:

220 V
240 V

Rated power in W: 800 W

Rated power in VA: 1000 VA

Input Connection Type: IEC 60320 C14

Output connection type: 3 IEC 60320 C13

Cable length: 1.50 m

Number of cables: 1

Provided equipment:

1 IEC 60320 C13 to Schuko power cable

1 IEC 60320 C13 to C14 power cable

1 USB cable

1 RS-232 configuration cable user manual

+ Batteries & Runtime

Battery type: Lead-acid battery

Battery voltage: 24 V

Number of battery filled slots: 1

Number of battery free slots: 0

Battery recharge time: 4 h

Battery life: 3…5 year(s)

Replacement battery: APCRBCV203

Battery charger power: 30 W rated

+ General

Max runtime: 4 min

Number of power module filled slots: 0

Number of power module free slots: 0

Redundant: No

+ Physical

Colour: Black (RAL 7010)

Height: 22.3 cm

Width: 14.5 cm

Depth: 28.8 cm

Net weight: 9.3 kg

Mounting location: Front

Mounting support: Floor

Mounting preference: No preference

Mounting mode: Not rack-mountable

USB compatible: Yes

Mounting position: Vertical.

+ Input

Input voltage limits:

110…285 V half load
160…280 V full load

Network frequency: 40…70 Hz auto sensing

+ Output

Maximum configurable power in VA: 1000 VA

Maximum configurable power in W: 800 W

Output frequency: 50/60 Hz +/- 3 Hz sync to mains

Harmonic distortion: 3 %

UPS type: Double conversion online

Wave type: Sine wave

Efficiency: 88 % (full load)

Additional information: Configurable for 220 : 230 or 240 nominal output voltage

Bypass type: Internal bypass (automatic and manual)

Crest factor: 3 : 1

+ Conformance

Product certifications:

CE

UKCA

EAC

TISI

Standards:

EN/IEC 62040-1:2019/A11:2021

EN/IEC 62040-2:2006/AC:2006

EN/IEC 62040-2:2018

+ Environmental

Ambient air temperature for operation: 0…40 °C

Relative humidity: 0…95 % non-condensing

Operating altitude: 0…3000 m

Ambient air temperature for storage: -20…50 °C

Storage Relative Humidity: 0…95 % non-condensing

Storage altitude: 0…15000 m

Acoustic level: 50 dBA

Heat dissipation: 372 Btu/h

IP degree of protection: IP20

+ Communications & Management

Alarm:  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Free slots: 1

Control panel: Multifunction LCD status and control console

+ Surge Protection and Filtering

Surge energy rate: 600 J

+ Packing Units

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 33 cm

Package 1 Width: 23.5 cm

Package 1 Length: 36.5 cm

Package 1 Weight: 10.6 kg

+ Offer Sustainability

REACh Regulation: REACh Declaration

EU RoHS Directive:

Compliant
EU RoHS Declaration

Optimized Energy Efficiency: Energy efficient product

Introduction APC Easy UPS SRV1KI 

The APC Easy UPS SRV1KI is a cost-effective and high-quality solution specifically designed for IT professionals in small and medium businesses, capable of handling a wide voltage range and inconsistent power conditions. With its SRV double-conversion on-line technology, this UPS provides essential power protection, ensuring reliable and uninterrupted connectivity for critical operations.

APC Easy UPS SRV1KI features a compact design, making it easy to install in various environments. It offers advanced battery management to optimize battery performance and extend battery life. This UPS also incorporates Automatic Voltage Regulation (AVR) technology, which stabilizes voltage fluctuations and protects connected devices from harmful power surges.

Safety features such as overload protection and short circuit protection are built into the APC Easy UPS SRV1KI to safeguard connected equipment against electrical hazards. Additionally, it has a cold-start function that allows the UPS to power up even when there is no utility power available.

Features APC Easy UPS SRV1KI 

High Efficiency of APC Easy UPS SRV1KI 

• Up to 94% efficiency in on-line mode and 91% in battery mode – 6000/10,000 VA

• Up to 88% – 90% efficiency in on-line mode and 93% – 94% in ECO mode – 1000/2000/3000 VA

ECO Mode/Green Mode

• An energy saving mode where the input voltage regulation range can be set/modified through the LCD

High Power Factor of APC Easy UPS SRV1KI 

• More real output power in watts: 0.8 PF for 1000/2000/ 3000 VA, and unity PF for 5000 to 20,000 VA

True Double-conversion

• Provides tight voltage, frequency regulation, and zero transfer time for reactive loads (machinery, lab equipment, etc.)

Emergency Power Off (EPO)

• Immediately remove power to all connected equipment in the event of emergency (applicable to standard and extended runtime 6000/10,000 VA models)

Wide Input Voltage Range of APC Easy UPS SRV1KI 

• 60% Load: 110 – 300 Vac

• Allow for unstable power environment

Simplified Monitoring and Management

• USB and serial ports for UPS management with PowerChute™ Serial Shutdown software*

• Optional Network Management Card supports networkbased monitoring

Intelligent Battery Management

• Maximises battery performance, life, and reliability through intelligent precision temperature compensated charging

Over Voltage Cut-off Device (OVCD)

• Under special application with high voltage condition, OVCD protection will prevent the damage of UPS components and extend the lifespan of the UPS

LCD/LED Display

• Intuitive interface provides detailed and accurate information about UPS status with ability to configure locally

Safety Agency Approved

• Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Built-in Automatic Bypass

• Supplies utility power to the connected loads in the event of a UPS power overload or fault