Tiếng Việt
SPECIFICATIONS DSOX3022G Keysight Oscilloscope
General technical data: |
|
| Bandwidth: | 200 MHz |
| Calculated rise time (10 to 90%): | ≤ 1.75 ns |
| Input channels: | 2 |
| Maximum sample rate: | 5 GSa/s half channels, 2.5 GSa/s all channels |
| Maximum memory depth: | 4 Mpts half channels, 2 Mpts all channels |
| Display size and type: | 8.5-inch capacitive touch gesture-enabled display |
| Waveform update rate: | > 1,000,000 waveforms per second |
| Connectivity: | Standard ports: One USB 2.0 hi-speed device port on rear panel. Supports USBTMC protocol Two USB 2.0 hi-speed host ports, front and rear panel. Support memory devices, printers, and keyboards LAN (10/100Base-T) WVGA video out Optional ports: GPIB Trigger out: BNC connector on the rear panel. Supported modes: triggers, mask, and waveform generator sync pulse |
Vertical System Analog Channels: |
|
| Hardware bandwidth limits: | Approximately 20 MHz (selectable) |
| Input coupling: | AC, DC |
| Input impedance: | Selectable: 1 MΩ ± 1% (14 pF), 50 Ω ± 1.5% |
| Input sensitivity range: | 100 MHz ~ 500 MHz models: 1 mV/div to 5 V/div 2 (1 MΩ and 50 Ω) 1 GHz models: 1 mV/div to 5 V/div 2 (1 MΩ), 1 mV/div to 1 V/div (50 Ω) |
| Vertical resolution: | 8 bits (measurement resolution is 12 bits with averaging) |
| Maximum input voltage: | 125 Vrms; 190 Vpk |
Horizontal System Analog Channels |
|
| Time base range: | 2 ns/div to 50 s/div |
| Time base accuracy: | ± 1.6 ppm + aging factor (1st year: ± 0.5 ppm, 2nd year: ± 0.7 ppm, 5 years: ± 1.5 ppm, 10 years: ± 2.0 ppm) |
| Time base delay time range: | Pre-trigger: Greater of 1 screen width or 250 μs Post-trigger: 1 s to 500 s |
| Channel-to-channel deskew range: | ± 100 ns |
Vertical System Digital Channels: |
|
| Digital input channels: | 16 digital (D0 to D15. pod 1: D7 ~ D0, Pod 2: D15 ~ D8) |
| Ngưỡng đầu vào: | Threshold per pod |
| Threshold selections: | TTL (+1.4 V), 5 V CMOS (+2.5 V), ECL (–1.3 V), user-defined (selectable by pod) |
| Maximum input voltage: | ± 40 V peak |
| Threshold accuracy: | ± (100 mV + 3% of threshold setting) |
| Maximum input dynamic range: | ± 10 V about threshold |
| Minimum voltage swing: | 500 mVpp |
| Input impedance | 100 kΩ ± 2% at probe tip |
| Input capacitance: | ~8 pF |
| Vertical resolution: | 1 bit |
Horizontal System Digital Channels: |
|
| Minimum detectable pulse width: | 5 ns |
| Channel-to-channel skew: | 2 ns (typical); 3 ns (maximum) |
Trigger System: |
|
| Trigger modes: | Normal, Auto, Single, Force |
| Trigger coupling: | DC, AC, HF reject, LF reject, Noise reject |
| Trigger holdoff range: | 40 ns to 10.00 s |
Digital Voltmeter (specifications are typical): |
|
| Functions: | ACrms, DC, DCrms |
| Resolution: | ACV/DCV: 3 digits |
| Measuring rate: | 100 times/second |
WaveGen – Built-in Function/Arbitrary Waveform Generator: |
|
| Waveforms: | Sine, Square, Ramp, Pulse, DC, Noise, Sine Cardinal (Sinc), Exponential Rise, Exponential Fall, Cardiac, Gaussian Pulse, and Arbitrary |
| Sine: | Frequency range: 0.1 Hz to 20 MHz |
| Square wave /pulse: | Frequency range: 0.1 Hz to 10 MHz |
| Ramp/triangle wave: | Frequency range: 0.1 Hz to 200 kHz |
| Noise: | Bandwidth: 20 MHz typical |
| Frequency: | Sine wave and ramp accuracy: 130 ppm (frequency < 10 kHz); 50 ppm (frequency > 10 kHz) Square wave and pulse accuracy: [50+frequency/200] ppm (frequency < 25 kHz); 50 ppm (frequency ≥ 25 kHz) Resolution: 0.1 Hz or 4 digits, whichever is larger |
| DC offset: | Range: ± 2.5 V into Hi-Z; ± 1.25 V into 50 Ω Resolution: 100 μV or 3 digits, whichever is higher Accuracy (DC mode): ± 1.5% of offset setting ± 3 mV |
| Amplitude: | Range: 20 mVpp to 5 Vpp into Hi-Z; 10 mVpp to 2.5 Vpp into 50 Ω Accuracy: 2% (frequency = 1 kHz) |
Waveform Math: |
|
| Arithmetic: | Add, subtract, multiply, divide, differentiate, integrate, FFT, Ax + B, squared, square root, absolute value, common logarithm, natural logarithm, exponential, base 10 exponential, low pass filter, high pass filter, averaged value, smoothing, envelope, magnify, max hold, min hold, measurement trend, chart logic bus (Timing or State), chart serial signal (CAN, CAN FD, LIN, and SENT) |
| FFT: | Record size: Up to 64 kpts resolution Window: Hanning, flat top, rectangular Time gated FFT: Gate the time range of data for FFT analysis in the zoom view. For time and frequency domain correlated analysis. Waveforms: FFT, max hold, min hold, average Blackman-Harris – Max 11 peaks, threshold and excursion control |
The Keysight DSOX3022G oscilloscope offers 200 MHz bandwidth, 5 GSa/s sampling rate, and up to 4 Mpts memory. With powerful analysis tools, a user-friendly interface, and fast waveform update rates, it is ideal for electronics, telecommunications, and automation applications. The DSOX3022G meets the needs of both students and professionals with signal decoding capabilities and various connectivity options.
Measurement Functions of the Keysight DSOX3022G Oscilloscope
The Keysight DSOX3022G oscilloscope delivers precise measurement capabilities with a waveform update rate of up to 1 million waveforms per second. This allows users to easily observe and analyze complex and rapidly changing electronic signals. With a 200 MHz bandwidth and two measurement channels, this device is suitable for a variety of applications in research and development, as well as in educational and industrial environments.
User-Friendly and Intuitive Design:
Equipped with a large color touchscreen, the Keysight DSOX3022G simplifies operation and waveform monitoring. Features like Auto Scale and Zone Trigger further minimize setup time and optimize measurement processes. The intuitive interface, with recognizable icons, allows users to quickly learn and efficiently use the device.
Powerful Analysis Tools:
The DSOX3022G oscilloscope offers a variety of powerful analysis tools, including automatic measurements, FFT analysis, and digital signal decoding capabilities. With the ability to save and analyze data directly on the device, you can easily check and assess signal quality, identify faults, and optimize circuit designs. The capability to export data and waveform images also makes it convenient for reporting and sharing measurement results.
Equipped with WaveGen Functionality on the Oscilloscope:
The Keysight DSOX3022G oscilloscope is equipped with the WaveGen functionality. This feature provides the ability to generate and customize a wide range of waveforms, meeting the testing and analysis needs across various fields. WaveGen allows users to create and modify waveforms, from basic types like sine, square, and triangle to more complex forms. This capability aids in simulating real-world signals and analyzing system responses to different signal types.
The WaveGen feature is directly integrated into the interface of the DSOX3022G oscilloscope, making waveform creation and usage simple and convenient. Users can quickly access and adjust parameters right on the touchscreen, streamlining the process of generating and working with waveforms.
Review DSOX3022G Keysight Oscilloscope
There are no reviews yet.