HIOKI CM3286-01 AC CLAMP POWER METER

SPECIFICATIONS HIOKI CM3286-01 AC CLAMP POWER METER

Measurement line
Single-phase, Three-phase (balanced with no distortion)

Measurement items
Voltage, Current, Voltage/ current peak, Active/ reactive/ apparent power, Power factor, Phase angle *1, Frequency, Simple Active Energy Consumption (Single-phase) [CM3286-01 only*2] Voltage/ current harmonic levels

AC voltage range 
[Measurement range] 80.0 V to 600.0 V, Single range,
Basic accuracy 45 – 66 Hz: ±0.7% rdg. ±3 dgt.
(Frequency characteristics: 45 to 1 kHz, True RMS)

AC current range (Hioki CM3286-01)
[Measurement range] 0.060 A to 600.0 A, 3 range, Basic accuracy:
±1.3% rdg. ±3dgt. (Frequency characteristics: 45 to 1 kHz, True RMS)

Power range
[Single phase] 0.005 kW to 360.0 kW
Basic accuracy: ±2.0% rdg. ±7 dgt. (50/ 60 Hz, Power factor=1)
[Balanced three-phase 3-wire] 0.020 kW to 623.5 kW
Basic accuracy: ±3.0% rdg. ±10 dgt. (50/ 60 Hz, Power factor=1)
[Balanced three-phase 4-wire] 0.040 kW to 1080 kW
Basic accuracy: ±2.0% rdg. ±3 dgt. (50/ 60 Hz, Power factor=1)

Harmonic levels (Hioki CM3286-01 only *2)
Voltage/ current harmonic levels up to 30th, Content factor,
Total harmonic distortion ratio

Other functions
[Phase angle *1] lead -180.0° to lag 179.9°, [Power factor] -1.000 to 1.000 [Frequency] 45.0 Hz to 999.9 Hz, PEAK, Phase detection, Max / Min / Avg value display, Auto hold, electric meter comparison, unbalanced 3-phase power estimate display, etc.

Dustproof and waterproof
IP54 (EN60529) Grip, excluding lever
Risk of electric shock from measured conductors increases when wet

Interface 
Bluetooth® 4.0LE, display measured values on an iOS or Android device

Power supply (Hioki CM3286-01)
LR03 Alkaline battery ×2, Continuous use: 25 hr (Backlight OFF)

Core jaw dia. φ 46 mm (1.81 in)
Dimensions and mass: 82 mm (3.23in) W × 241 mm (9.49in) H × 37 mm (1.46in) D, 450 g (15.9 oz)
Accessories
Connection cord L9257 ×1, LR03 Alkaline battery ×2, Carrying case C0203 ×1, Instruction manual ×1
[CM3286-01 only]Notice Regarding Equipment That Emits Radio Waves ×1

Introduction Hioki CM3286-01

Hioki clamp meters are best in class handheld current and voltage meters for safely and accurately measuring power lines. The Hioki CM3286-01 clamp on power meter can measure voltage, current, power, power factor, phase angle, reactive power or frequency, as well as detect phase sequence on live lines at any desired point of a single-phase circuit or three-phase circuit.

CAT IV 600V, CAT III 1000V

Features Hioki CM3286-01

–  Display four parameters simultaneously

– A handheld power meter that measures from 5 W of power and 60 mA of current Measure power ranging from 5 W at a low current of 60 mA to 360 kW

– In addition to current, voltage, and power, measure simple integral power consumption and phase sequence

– Features and functions deliver fast and efficient testing

– Transfer measured values to tablets and smartphones using free app “GENNECT Cross”, quick and easy data recording (Hioki CM3286-01 only)