Technical ARC TT200, TT600, TT1000, TT1000P & TT3000 welding positioners

SPECIFICATIONS TECHNICAL ARC TT200, TT600, TT1000, TT1000P & TT3000 WELDING POSITIONERS

+ Technical ARC TT200

Supply voltage: 230V

Max load horizontal: 20kg

Max load at 90˚: 7.5kg

Table diameter: 180mm

Speed range: 2-15 rpm

Max welding current: 180A@35%

Approx height: 220mm

+ Technical ARC TT600

Supply voltage: 230/110V

Max load horizontal: 60kg

Max load at 90˚: 25kg

Table diameter: 305mm

Speed range: 0.5-12 rpm

Max welding current: 350A@60%

Approx table height: 380mm

Approx footprint W/L: 440mm

+ Technical ARC TT1000/TT1000P

Supply voltage: 230/110V

Max load horizontal: 100kg

Max load at 90˚: 50kg

Table diameter: 345mm

Speed range: 0.2-15 rpm

Speed range 1000P: 0.1 – 5 rpm

Max welding current: 450A@60%

Approx table height: 420mm

Approx footprint W / L: 440 x 440mm

+ Technical ARC TT3000

Supply voltage: 230/110V

Max load horizontal: 300kg

Max load at 90˚: 150kg

Table diameter: 450mm

Speed range: 0.1-2.5 rpm

Max welding current: 450A@60%

Approx table height: 600mm

Approx footprint W / L: 550 x 600mm

Introduction Technical ARC TT200, TT600, TT1000, TT1000P & TT3000 welding positioners

+ TT200 – Maximum load 20kg, very light duty low cost.

+ TT600 – Maximum load 60kg, high speed-low torque, ideal for high speed light MIG welding jobs.

+ TT1000 – Maximum load 100kg, high speed-low torque, ideal for high speed MIG welding jobs.

+ TT1000P – Maximum load 100kg, low speed-higher torque, ideal for slower welding jobs & higher load.

+ TT3000 – Maximum load 300kg, low speed-higher torque, ideal for slower welding jobs & higher load.

All models are supplied as standard with a foot switch to stop & start the rotation.

From TT600 upwards all are available with TACO option, this provides the most stable & consistant speed control, ideal for slow speeds, higher loading & where load levels vary during rotation.

Front panel controls include clockwise or anticlockwise rotation switch, a knob to control the speed & on the TT600 upwards a high-low speed range switch for finer control of speed. The turntable can be positioned to any angle between horizontal & 90 degrees. Models TT600 upwards have a hand wheel & worm gear to adjust this angle & a lock off device is fitted to maintain desired table position. The TT200 can be locked into horizontal to maintain load stability. All tables are machined with slots for mounting jigs or a chuck. Each table has circular score marks to assist in accurate setting up of the job. Under the table is a substantial brass bush arrangement for the welding earth return and we supply a 2M welding lead attached to this.

All models are protected from HF interference & can be used with all welding machines, MIG, TIG etc.

Options available at time of order.

Options available at time of order;

– Taco speed control -provides precise & consistant rotation speed, ideal for uneven loads, high precision jobs such as TIG welding at slow speed, larger diameter & heavier jobs etc.

– Remote speed control socket fitted ready to accept variable foot pedal or other remote control.

– Programmable digital counter with pool delay timer & output to drive welding machine – this can be used to start rotation & welding process & to stop after exact rotation angle has been reached. Can be set to any angle of rotation from 1 degree through to multiple rotations. For instance set 365 degrees for a full round profile + overlap. (needs taco feedback option above)

– Auto start/stop of rotation with welding current.

Lots more options including fully automated welding stations, please contact us to discuss your requirements.

Accessories

+ 2.5” quick release mini chuck for TT200

+ 8” quick release chuck – fits TT600, TT1000, TT3000                          

+ 12” heavy duty chuck for TT3000 only

+ Variable speed pedal – (must have function on TT)