Mitutoyo 543-392B ABSOLUTE Digimatic Indicator ID-C

SPECIFICATIONS MITUTOYO 543-392B ABSOLUTE Digimatic Indicator ID-C

Introduction MITUTOYO 543-392B ABSOLUTE Digimatic Indicator ID-C

The Mitutoyo ABSOLUTE Digimatic ID-C standard-type indicators are highly accurate for short linear measurements and provide Go/No-Go judgements. Mitutoyo 543-392B digital indicators provide up to a 12.7mm / .5″ range in a compact design that is easy to use and read. The ID-C indicator’s face can rotate 330° to enable easier readings on the large 9mm LCD display from nearly any angle. Large push buttons provide direct, easy access to all of the indictor’s functions, and the positive/negative count from the spindle’s up/down movement can be toggled. The ABSOLUTE sensor automatically restores the last origin position when the indicator is turned on, allowing for quick-start operation which is useful in multipoint measurements.

Features Mitutoyo 543-392B

– Similar in size to standard Series 2 dial indicators

– Available in Metric and Inch/Metric models

– Available with SPC output capabilities

– G0/No-Go display lights red or green when upper and lower tolerances are set

– Internal calculations using the simple formula of [F(x)=Ax] are available

– ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on

– Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use

– SPC output function allows for quick and easy data management in real time

– Functions include Origin set, zero set, Go/No-Go judgement, counting direction switching, power On/Off, data output and inch/mm conversion (on inch/metric models only)

– Alarm: Low voltage, counting value composition error, over-flow error and tolerance limit setting error

– Unlimited response speed eliminates over-speed errors

– IP42 for protection against objects greater than 1mm and water

– Supplied in a fitted plastic

Mitutoyo Brand

Mitutoyo was founded by Japanese Yehan Numata in 1934. Mitutoyo now offer a full line of more than 5,500 metrology tools, instruments and equipment to provide customers every metrology solution from one company. Mitutoyo provides measurement solutions for the Aerospace, Automotive, Defense, Electronics, Energy, General Manufacturing, Medical, Plastics and Rubber industries.