As part of a facility monitoring solution, the IsoAir® 310P Particle Sensor from Particle Measuring Systems (PMS) makes it easy to monitor air in remote locations or in areas with process restraints.
With the successful introduction of the new IsoAir® Pro-E and IsoAir Pro-Plus Aerosol Particle Sensors, we are announcing the obsolescence of the IsoAir® 310P. The last day that Particle Measuring Systems will accept orders for this model is April 15, 2022.
Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with a Hepa filtered exhaust.
It has unparalleled performance in a chemical-resistant and easy-to-disinfect 316 L box, and the passivated stainless steel surface has well defined microbial control characteristics.
The clean, reliable internal pump lowers installation costs and the need for costly vacuum system connections; the instrument is available with a wide range of communications protocol such as Ethernet, Modbus, Wifi, Analog 4-20mA for full compatibility with the existing monitoring system.
Tackling the 21CFR11 Challenge: From Paper to Paperless >
Viable Non Viable Particle Counts to Fully Meet Regulatory Requirements >
Steps to Ensuring a Successful Audit – Effective Risk Assessment Design Webinar >
Private: EU GMP Annex 1 Review, Insights, and Feedback >
Assuring Data integrity in an Environmental Monitoring System >
Facility Net Software provides a solution for comprehensive environmental monitoring, including a real-time and historical data display. Compatible with Particle Measuring Systems particle counters and molecular contamination monitors, as well as various third-party products.
FacilityPro® Software provides the interface, data management, and reporting for an environmental monitoring system. FacilityPro’s ability to manage viable, nonviable and environmental data through a common system improves the efficiency of production operations and quality investigations.
The Differential Air Pressure Sensor allows for accurate measurement of air with a range of 0 to 0.25in (0 to 6.35mm) of water. Current output: 4-20mA.