Techmaster provides ISO/IEC 17025:2017 accredited Electrical & Electromagnetic calibration — accredited by ANAB (USA), traceable to the SI and recognized worldwide through ILAC-MRA. On-site service nationwide.
Electrical & electromagnetic calibration (DC/AC low frequency) determines the error of instruments that measure & source electrical quantities: voltage, current, resistance, capacitance, frequency, power. Techmaster’s ISO/IEC 17025:2017 lab is traceable to the volt (V) and ohm (Ω).
Electrical instruments are the backbone of electronics test, EMS, energy and electrical safety. Drifting DMMs, sources and scopes corrupt every downstream measurement — causing scrap, wrong assessments and safety risk.
Techmaster calibrates electrical instruments with high-accuracy multifunction calibrators, traceable to the SI volt and ohm; well suited to electronics, semiconductor plants and labs.
The table below lists typical parameters & measurement ranges for this discipline.
| Parameter / Instrument | Typical measurement range | CMC / Measurement uncertainty |
|---|---|---|
| DC voltage | 0 – 1000 V | [Verify against scope] |
| DC current | 0 – 20 A | [Verify against scope] |
| Resistance | 0 Ω – 100 MΩ | [Verify against scope] |
| AC voltage | up to 1000 V, up to 100 kHz | [Verify against scope] |
| Frequency (LF) | up to several MHz | [Verify against scope] |
⚠ Note: The ranges & CMC below are typical reference values. Please verify against Techmaster’s official Scope of Accreditation before publishing — actual CMC depends on the reference standard, method and measurement conditions.
Electrical measurements are traceable to the SI volt (V) and ohm (Ω) through certified multifunction calibrators (e.g. Fluke 5xxx), in turn traceable to Josephson/quantum-Hall standards at the national level.
Our lab is ISO/IEC 17025:2017 accredited by ANAB (USA); certificates are recognized worldwide through ILAC-MRA.
Reference standards are traceable to the SI International System of Units, ensuring reliable, comparable measurement results.
A mobile calibration capability performs work right at your facility, cutting downtime and equipment transport risk.
Look up and manage certificates, history and recalibration reminders online anytime via portal.techmaster.us.
An HCMC head office and a Bac Ninh branch serve the southern and northern manufacturing regions quickly.
Over 10 years serving electronics, EMS, semiconductor plants and labs across Vietnam with an experienced engineering team.
A transparent 6-step process to ISO/IEC 17025 — from request intake to certificate delivery and recalibration reminders.
We log your equipment list, discipline and technical requirements, advise the scope and send a fast calibration quote.
Our team collects the equipment from your site, or a mobile calibration unit performs the work right at your facility.
Calibration is carried out using ISO/IEC 17025 methods, SI-traceable standards and controlled measurement conditions.
We issue the calibration certificate (with error and measurement uncertainty) and apply a calibration label to the device.
Look up and download certificates online 24/7 via portal.techmaster.us and manage your full calibration history.
Our system reminds you of the next recalibration at a suitable interval, keeping your compliance continuously valid.
Techmaster calibrates across 12 metrology disciplines. Explore related disciplines:
Please contact Techmaster using the details below. Our team is always ready to assist and answer any questions you may have. Thank you for trusting our services.
Address: 175 Vo Nguyen Giap, An Khanh Ward, Ho Chi Minh City
Hotline: +84 908 173 345
Email: marketing@techmaster.com.vn
Address: D1, Phu Dien Urban Area, Dong Nguyen Ward, Bac Ninh Province
Business Registration No.: 0312668882 (issued 28/02/2014)
Issued by: Department of Planning and Investment, Ho Chi Minh City
We are here and remain the right choice for you.
Techmaster’s technical staff are ready to address any questions, concerns or requests about our calibration information and services. Please complete the form below so we can respond to your enquiry.
Get expert advice on the right calibration discipline and a fast quote from the Techmaster team.