The Lasair III Aerosol Portable Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean.
It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages, such as DataAnalyst, FacilityNet or FacilityNet Pharma Software.
Power is provided to the unit through the use of the on-board, hot-swappable batteries. Power can also be provided through the use of an external AC power source, which can simultaneously power the unit and charge the on-board batteries.
The Lasair III Portable Particle Counter accepts inputs from a wide range of environmental sensors through the four built-in 4-20 mA inputs. Wireless network communications are made easy with an externally mounted wireless adapter, simplifying communications with network systems.
A Practical Guide to Aerosol Particle Counter Matching >
Data Integrity: Understand and Comply with GMP and FDA Requirements for 21 CFR Part 11 >
21 CFR Part 11 and Data Integrity FAQ >
Sampling Compressed Gas with the Lasair III Particle Counter >
Helmke Drums Particle Monitoring >
Cleanroom classification of air cleanliness by particle concentration >
Paper Series: Guides to Particle Technology >
Effective Risk Assessment in Pharmaceutical: Steps to Ensuring a Successful Audit >
Improve yield and quality by monitoring particle contamination during optics manufacturing >
Airborne Particle Measurements: 100 LPM vs. 1 CFM >
Particle Counter Tubing & Particle Transportation >
Testing Valves for Particle Generation >
Powder Filling: When and Where to Monitor >
Planning and Installing a Facility Monitoring System >
Selecting The Most Suitable Particle Sample Point Locations In Your Cleanroom >
Selecting an Airborne Particle Counter >
Counting Efficiency and Resolution in Optical Particle Counters >
Printer Paper is for use with standard printers, as well as for cleanroom-appropriate devices.
The Spare Lithium Battery is to keep on hand for replacement power as needed. Also available as a four-pack.
Facility Net Software provides a solution for comprehensive environmental monitoring, including a real-time and historical data display. Compatible with Particle Measuring Systems particle counters and molecular contamination monitors, as well as various third-party products.
The High-Pressure Diffuser lets you count particles in high-pressure gas lines by taking gas at pressures between 40 and 100psi and reducing it to a level acceptable to particle counters designed for atmospheric pressure.
The Hand-Held Isokenetic Sampling Probe works in conjunction with a 1CFM LASAIR III Particle Counter isokinetic in 90FPM airflow.
The only true .1 micron particle counter, providing real-time measurement of yield-impacting cleanroom particles with three configurations.