Techmaster provides ISO/IEC 17025:2017 accredited Length & Dimensional calibration — accredited by ANAB (USA), traceable to the SI and recognized worldwide through ILAC-MRA. On-site service nationwide.
Length & dimensional calibration compares dimensional instruments — calipers, micrometers, dial indicators, gauge blocks — against higher-accuracy length standards to determine error and measurement uncertainty. Techmaster’s ISO/IEC 17025:2017 lab is traceable to the SI metre (m).
Even tiny dimensional deviations can cause scrap, mis-assembly and quality disputes — especially in precision machining, electronics and semiconductor work. Periodic calibration of dimensional instruments controls this risk and satisfies ISO 9001, IATF 16949 and AS9100 requirements.
Techmaster calibrates using ISO/IEC 17025 methods with reference gauge-block sets and standards traceable to the international metre. Certificates are accredited by ANAB (USA) and recognized worldwide via ILAC-MRA.
The table below lists typical parameters & measurement ranges for this discipline.
| Parameter / Instrument | Typical measurement range | CMC / Measurement uncertainty |
|---|---|---|
| Gauge blocks | 0,5 – 100 mm | [Verify against scope] |
| Calipers | 0 – 300 mm (up to 1000 mm) | [Verify against scope] |
| Micrometers | 0 – 100 mm | [Verify against scope] |
| Dial indicators | 0 – 25 mm | [Verify against scope] |
| Tapes & rules | 0 – 10 m | [Verify against scope] |
⚠ Note: The ranges & CMC below are typical reference values. Please verify against Techmaster’s official Scope of Accreditation before publishing — actual CMC depends on the reference standard, method and measurement conditions.
Length measurements are traceable to the SI metre (m) through grade K/0 reference gauge-block sets and length standards, following reference standards such as ISO 3650 (gauge blocks) and the JCGM guides on measurement uncertainty.
Our lab is ISO/IEC 17025:2017 accredited by ANAB (USA); certificates are recognized worldwide through ILAC-MRA.
Reference standards are traceable to the SI International System of Units, ensuring reliable, comparable measurement results.
A mobile calibration capability performs work right at your facility, cutting downtime and equipment transport risk.
Look up and manage certificates, history and recalibration reminders online anytime via portal.techmaster.us.
An HCMC head office and a Bac Ninh branch serve the southern and northern manufacturing regions quickly.
Over 10 years serving electronics, EMS, semiconductor plants and labs across Vietnam with an experienced engineering team.
A transparent 6-step process to ISO/IEC 17025 — from request intake to certificate delivery and recalibration reminders.
We log your equipment list, discipline and technical requirements, advise the scope and send a fast calibration quote.
Our team collects the equipment from your site, or a mobile calibration unit performs the work right at your facility.
Calibration is carried out using ISO/IEC 17025 methods, SI-traceable standards and controlled measurement conditions.
We issue the calibration certificate (with error and measurement uncertainty) and apply a calibration label to the device.
Look up and download certificates online 24/7 via portal.techmaster.us and manage your full calibration history.
Our system reminds you of the next recalibration at a suitable interval, keeping your compliance continuously valid.
Techmaster calibrates across 12 metrology disciplines. Explore related disciplines:
Please contact Techmaster using the details below. Our team is always ready to assist and answer any questions you may have. Thank you for trusting our services.
Address: 175 Vo Nguyen Giap, An Khanh Ward, Ho Chi Minh City
Hotline: +84 908 173 345
Email: marketing@techmaster.com.vn
Address: D1, Phu Dien Urban Area, Dong Nguyen Ward, Bac Ninh Province
Business Registration No.: 0312668882 (issued 28/02/2014)
Issued by: Department of Planning and Investment, Ho Chi Minh City
We are here and remain the right choice for you.
Techmaster’s technical staff are ready to address any questions, concerns or requests about our calibration information and services. Please complete the form below so we can respond to your enquiry.
Get expert advice on the right calibration discipline and a fast quote from the Techmaster team.