Leverage on Fluke’s breakthrough acoustic imaging technology to quickly & accurately pinpoint compressed air, vacuum, gas or steam leaks

• Detect leaks up to frequency range of 52/100kHz
• Perform scanning in your facility with tool detection range up to 70/120m
• Get to capture exact leak location in both picture/video form
• Save up to 75% of your inspection time

Get immediate answers to mechanical issues with Fluke 810 Vibration Tester

• Tri-axial accelerometer sensors reduces 2/3 of the measurement time than using single axis sensor
• Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
• Repair recommendations advise technicians on corrective action
• Fault severity scale with four severity levels helps you prioritize maintenance work

Save significant time from making multiple routine trips

• Do more for less by covering various tasks in pressure, temperature, electrical loop etc
• Accurately identify errors and correct it with HART protocol
• Integrated workflow for a complete field calibration process that automates and documents the test results

Troubleshooting can easily take up 80% of a technician’s time. Overcome this challenge without the need to stop operation

• Measure 4-20 mA live control signal without breaking a loop
• Get all the instrumentation troubleshooting and verification needs in just one tool
• Resolve signal issues for PLC and control system analog I/O