Technical ARC TS-MIG Industrial SWF MIG range 300-630 AMP

TS-MIG models are all designed and manufactured in Great Britain to the very highest industrial standards. Built to work hard & keep working for years & years. Simple reliable construction & great welding performance means these have unrivalled reputation in the industry. We have end user customers with in excess of 50 TS-MIG machines in production, in many cases they start with just one or two & built up over years replacing old or unreliable machines. All TS-MIG models offer the user the very best welding performance with minimal spatter and a soft stable arc throughout the range. At the heart of every machine is a large copper wound transformer & other heavy duty components all constructed in a robust powder coated steel case, this ensures these are the most solid & reliable range of SWF MIGs available today. We also have the best long term back up with all parts available for a minimum of 20 years. Environmentally friendly too! Made with less than 1% plastic materials + very long product lifespan + over 90% energy efficiency.

TS-MIG 3 phase 400V models are available from 300A-630A (3 phase model numbers finish ..3)

TS-MIG 1 phase 230V models are available from 300A-520A (1 phase model numbers finish ..1)

Features Technical ARC TS-MIG Industrial SWF MIG range 300-630 AMP

• Superb range of volt steps for very fine adjustment of power
• Super smooth welding characteristics through the range.
• 100% copper wound transformer with 5 year warranty.
• Very high duty cycle.
• High efficiency of over 90% to minimise electric usage.
• Easy setting infinitely variable wire speed control.
• Torch trigger latching fitted as standard.
• Built in electronic burn back with adjustment.
• Industry standard euro torch connection.
• Can be used with all standard wire and spool sizes.
• Over 80% of supply chain value is of British origin.
• Large 300mm wheels & HD front casters.
• Voltage switches have steel shafts not plastic like competitors
• Quality wire drive system and powerful motor.
• All models have an all metal 4 roll drive standard (except 301X & 303X).
• Models 301X & 303X have a powerful all metal 2 roll geared drive.

2020 updates for all models

1. Optional fume extractor output 110V or 230V to suit most extractor units – mount your extractor on the machine & the TS-MIG will power it directly. Optional ‘on demand’ fume extractor circuit, instantly switches on supply to extractor at start of weld & switches off after 10 seconds.
2. Interconnector clamped at rear of wire feeder for extra support.
3. Optional digital meter on wire feeder to show welding volts/amps.
4. Water cooled interconnectors can now be fitted without removal of side panel.

Approx power source size incl height of wheels & length of bottle carrier, 730mm H x 880mm L x 460mm W (excluding width of rear wheels).

Weight 85 to 160kg depending on model.

All models are manufactured to comply with BS EN 60974-1 & BS EN 60974-10

Also in full compliance with RoHS directive 2011/65/EU & weee directive 2012/19/EU

We guarantee to fully support these machines with spares & service for a minimum of 20 years, the best long term back up in the industry!

‘Invest in the best’ quality made British welding equipment.

Superb welding performance combined with rugged reliable build & the lowest long term maintenance in the industry, we guarantee you will be delighted!

Wire feeder style comparison.

Open or fully enclosed wire feeder- both 4×4 drive & offer exactly the same welding performance.

Enclosed wire feeder case is taller & slightly narrower than the open feeder. The wire spool is mounted vertical behind a larger metal door giving good protection of the welding wire. Optional castors can be fitted to allow the feeder to move across a floor easily. 

Open type wire feeder case is the most compact unit, built on a tough 3mm chassis with a small metal door to access the wire feed rollers. The welding wire spool is mounted on an angle at the rear of the chassis & is uncovered for easy access. An optional spool cover can be fitted to this to protect welding wire. Optional castors can also be fitted. Lower centre of gravity makes the open feeder a more stable & robust option if being dragged around a rough workshop floor on castors. Furthermore optional outriggers fitted with larger castors can be specified for even better stability on busy workshop floors.

Enclosed & open wire feeder comparison.

Open wire feeder with optional spool cover.

Other wire feeder options – Horizontal suitcase wire feeder

Built into a tough GRP case, this is a very stable low profile option with the same performance as standard open or enclosed wire feeders.

Options & accessories for all models.