facebook

Technical ARC Plasma X4 AC

 

Features

  • Variable output power from a fine cut on foil right up to cutting thick plate.
  • Cutting performance as good as the very best.
  • Drag cut consumables for easy template following.
  • Pilot arc fitted to pierce through paint & rust etc.
  • Non HF air arc starting means safe for use on vehicles & near IT equipment.

SPECIFICATIONS TECHNICAL ARC PLASMA X4 AC

Output power range 10-31A (38A peak)
Supply voltage 230V 1ph
Duty cycle 31A@40%
Input fuse recommended (slow) 230V – 16A (13A OK to 90% output)
Recommended min generator 4kva
Size approx 310x400x210mm
Weight approx 13.5kg
Torch 4M S45 Trafimet – direct fit
Compressed air requirements Built in compressor
Max severance cut (very slow & rough cut) 15mm
Max recommended cut steel – slow but clean 10mm
Max rec cut stainless S & alum – slow but clean 8mm

Introduction Technical ARC Plasma X4 AC

The X4 AC plasma cutter allows cutting anywhere a 230V supply is available, no compressed air required.

Ideal for mobile applications, construction sites, factory maintenance, farmyards etc, light to medium duty cutting applications.

  • Ideal for cutting all metals even painted & rusty material.
  • Clean cutting up to 10mm steel.
  • Severance (very slow rough cut) up to 15mm.
  • 230V single phase supply 13A/16A.

Plasma X4 AC model has a built in air compressor so you can cut metal anywhere with just a 230V supply needed.

Technical ARC Plasma X4 AC

Standard features 

  • Variable output power from a fine cut on foil right up to thick bar.
  • Good solid cutting performance.
  • Drag cut consumables for easy template following.
  • Pilot arc fitted to pierce through paint & rust etc.
  • Non HF air start design so safe for use on vehicles & near IT equipment.
  • Genuine Trafimet S45 Italian torch fitted.
  • Low cost torch consumables available in every part of the world.
  • High duty cycle to cope with demanding applications.
  • High efficiency low electric  consumption.
  • On demand fan & compressor circuit – only runs when needed.
  • 230V single phase 16A (13A up to nearly power).
  • Generator friendly.
  • Engineer friendly (these machines can easily be maintained).

Built to comply with BS EN 60974-1, CE marked, RoHS compliant and WEEE registered so you can be sure of the safety & quality.

Options

Longer torch.

Circle cutting kit.

Extended torch consumables to get into tight spaces.

We guarantee to fully support these models with spares & service for a minimum of 10 years.

The best back up in the industry!

Brand

Review Technical ARC Plasma X4 AC

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Technical ARC Plasma X4 AC
Choose a image
0 character ( Minimum of 10)
    +

    Very poor Not that bad Average Good Perfect

    There are no reviews yet.

    No comments yet

    RECENT PRODUCT

    hotline techmaster
    Hotline: 0936 532 379
    zalo techmaster Zalo: 0936 532 379 messenger techmaster Nhắn tin Facebook
    support techmaster