Tiếng Việt
Technical ARC OPTeCUT Industrial Plasma 45A-165A – information
SPECIFICATIONS TECHNICAL ARC OPTeCUT INDUSTRIAL PLASMA 45A-165A
+ OPTeCUT INDUSTRIAL PLASMA 45C
Standard input volts – DUAL VOLTAGE: 230/400V
Input fuse (D) slow.: 16A (230/400V)
Optional input volts, please state on order.: 110V, 110/230, or 400V only
OPTeBOOST sever cut max: 32mm
Standard sever cut: 24mm
Max quality cut: 18mm
Max pierce capacity: 12mm
Max cut speed 10mm M steel: 880mm/min
Max cut speed 20mm M steel: 210mm/min
Max cut speed 30mm M steel: N/A
Gouging capacity removal rate: 2.6kg/hr
Duty cycle max output power @: 40%
Output power @ 100%: 28A
Output amperage range: 15-45A
Air pressure & flow requirements: 4.5 bar 100L/min
Min generator size for up to ¾ output: 4.5KVA
Plasma torch fitted standard: S65 6M – fitted directly.
Optional quick connector can be specified on order.
+ OPTeCUT INDUSTRIAL PLASMA 65C
Standard input volts: 230V
Input fuse (D) slow.: 32A
Optional input volts, please state on order.: Dual 230/400V or 400V
OPTeBOOST sever cut max: 40mm
Standard sever cut: 35mm
Max quality cut: 28mm
Max pierce capacity: 16mm
Max cut speed 10mm M steel: 1250mm/min
Max cut speed 20mm M steel: 470mm/min
Max cut speed 30mm M steel: 130mm/min
Gouging capacity removal rate: 4.2kg/hr
Duty cycle max output power @: 50%
Output power @ 100%: 43A
Output amperage range: 15-65A
Air pressure & flow requirements: 4.5 bar 100L/min
Min generator size for up to ¾ output: 7KVA
Plasma torch fitted standard: S65 6M – fitted directly.
Optional quick connector can be specified on order.
+ OPTeCUT INDUSTRIAL PLASMA 95
Standard input volts: 400V
Input fuse (D) slow.: 16/20A
Optional input volts, please state on order.: 230V (63A supply needed)
OPTeBOOST sever cut max: 51mm
Standard sever cut: 42mm
Max quality cut: 35mm
Max pierce capacity: 20mm
Max cut speed 10mm M steel: 1700mm/min
Max cut speed 20mm M steel: 700mm/min
Max cut speed 30mm M steel: 300mm/min
Gouging capacity removal rate: 8.0kg/hr
Duty cycle max output power @: 50%
Output power @ 100%: 70A
Output amperage range: 20-95A
Air pressure & flow requirements: 5 bar 260L/min
Min generator size for up to ¾ output: 10KVA
Plasma torch fitted standard:
P130 – 6M (or Z torch on request)
Quick torch connector included for easy removal.
+ OPTeCUT INDUSTRIAL PLASMA 125
Standard input volts: 400V
Input fuse (D) slow.: 32A
Optional input volts, please state on order.:
OPTeBOOST sever cut max: 63mm
Standard sever cut: 55mm
Max quality cut: 42mm
Max pierce capacity: 23mm
Max cut speed 10mm M steel: 2200mm/min
Max cut speed 20mm M steel: 1020mm/min
Max cut speed 30mm M steel: 470mm/min
Gouging capacity removal rate: 10.1kg/hr
Duty cycle max output power @: 50%
Output power @ 100%: 90A
Output amperage range: 20-125A
Air pressure & flow requirements: 5 bar 280L/min
Min generator size for up to ¾ output: 14KVA
Plasma torch fitted standard:
P130 – 6M (or Z torch on request)
Quick torch connector included for easy removal.
+ OPTeCUT INDUSTRIAL PLASMA 140
Standard input volts: 400V
Input fuse (D) slow.: 32A
Optional input volts, please state on order.:
OPTeBOOST sever cut max: 70mm
Standard sever cut: 60mm
Max quality cut: 45mm
Max pierce capacity: 25mm
Max cut speed 10mm M steel: 3200mm/min
Max cut speed 20mm M steel: 1450mm/min
Max cut speed 30mm M steel: 650mm/min
Gouging capacity removal rate: 11.5kg/hr
Duty cycle max output power @: 55%
Output power @ 100%: 105A
Output amperage range: 20-140A
Air pressure & flow requirement: 5.0 bar 360L/min
Min generator size for up to ¾ output: 18KVA
Plasma torch fitted standard:
P165 – 6M
Quick torch connector included for easy removal.
+ OPTeCUT INDUSTRIAL PLASMA 165
Standard input volts: 400V
Input fuse (D) slow.: 32/45A
Optional input volts, please state on order.:
OPTeBOOST sever cut max: 80mm
Standard sever cut: 70mm
Max quality cut: 52mm
Max pierce capacity: 30mm
Max cut speed 10mm M steel: 3800mm/min
Max cut speed 20mm M steel: 1670mm/min
Max cut speed 30mm M steel: 770mm/min
Gouging capacity removal rate: 13.4kg/hr
Duty cycle max output power @: 60%
Output power @ 100%: 130A
Output amperage range: 20-165A
Air pressure & flow requirements: 5.5 bar 390L/min
Min generator size for up to ¾ output: 22KVA
Plasma torch fitted standard:
P165 – 6M
Quick torch connector included for easy removal.
Introduction Technical ARC OPTeCUT Industrial Plasma 45A-165A
All our OPTeCUT plasma models are built using our renowned OPTeARC hybrid chopper technology. This combines the performance advantages you get from the best inverter with the rugged reliable build of an older type machine. This gives you exceptional cutting performance not far removed from laser quality & the high efficiency means less input power & more output power allowing us to push the boundary of whats normally possible on a given supply. Not quite as light as a small inverter, but compare our performance specs & see why everything else about our OPTeCUT models is a big plus!
2019-Updated specs-even better performance
CUT UP TO 80mm metal using just compressed air & electric.
Metal marking function now standard on all models.
Key benefits of the OPTeCUT PLASMA models
- Cut all metallic materials with ease, steel, stainless, aluminium, hardox, copper, brass etc.
- OPTeCUT 65 cuts nearly twice as fast & twice as much as nearest competitor on 230V.
- OPTeCUT 45 on 110V, up to 25mm cutting on 110V, unbeatable!
- OPTeCUT 95 230V – probably the largest cut capacity single phase plasma in the world!
- Exceptional cut quality from all models with near perfect narrow straight cuts.
- Copper drag nozzle fitted standard for the best visibility of material & easy template following.
- OPTeBOOST switch, provides up to 1 min of extra cutting power to tackle those extra heavy jobs.
- Long life consumables give you more cutting time & less down time.
- Lower cost consumables compared with other leading competitors & no start cartridge needed.
- None HF start design means safe for use on CNC cutting tables & near IT systems.
- Over 90% efficiency means these are amongst the lowest power consumption in class.
- Superb gouging performance removes material faster & easier than most competitors.
- Low fume technology means up to 50% reduction in fumes compared with our competitors.
- New ergonomic torch handle on all models for easy, comfortable use.
- Generator friendly design guarantees no damage even if the generator is unstable!
- Not affected by dirty harsh environments like inverter based machines are.
- Really rugged industrial design for the longest possible life.
- All models from 95 upwards include a quick connect torch adaptor for easy torch removal.
- Models from 95 up also now include a digital ammeter showing exact cutting current.
Standard supply & options & accessories
Standard supply– Power source with 6M hand torch, 3M work lead, 3M input lead, adjustable air regulator/filter & basic torch consumable kit. OPTeCUT 95-165 models also includes caster wheels under chassis (undercarriage).
+ Options available at time of order
CNC / robotic interface fitted with variable divided arc volts output.
Quick connect torch adaptor to allow fast changing of torch (already fitted on 95-165 models).
Different input voltage, 480V, 500V, 550V etc
Casters fitted on 45C + 65C models.
Longer cables & torches.
+ Optional accessories
CNC cutting torches (mechanised cutting) in 6M or 12M various lengths.
Circle cutting kit.
Ultimate cutting kit – Bevel tool + circle cutting kit.
High purity inline air filter – maximises consumable life & gives best cut quality, if your air quality is not close to perfect this makes a real difference to any plasma cutting system.
Both hand & mechanised torches are available from stock in 6M & 12M lengths, other lengths on request.
Review Technical ARC OPTeCUT Industrial Plasma 45A-165A
There are no reviews yet.