Mitutoyo 543-280B Absolute Digimatic Indicator ID-C

Introduction Mitutoyo 543-280B Absolute Digimatic Indicator ID-C

The Mitutoyo 543-280B with ability to write value the value max/min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitue for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.

The signal can be output to an external device like a sequencer through the NPN open-collector. The GO/±NG judgment result is also indicated by the green/red LED and the O,>” signs on LCD. Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on

The Mitutoyo 543-280B Absolute Digimatic Indicator ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.

Features Mitutoyo 543-280B

• This is an externally powered digimatic indicator with a N-ch open drain -NG, OK, +NG output
• Dust protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
• Measures MAX/MIN/RANGE (run-out value)
• Saves three different preset and tolerance settings
• Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
• Analogue bar graph in the display, 12 different scales switchable
• Go/+/-NG tolerance judgment function