Tiếng Việt
SPECIFICATIONS KYORITSU 2117R AC DIGITAL CLAMP METER
| AC A | 60.00/600.0/1000A (Auto-ranging) ±1.5%rdg±4dgt [45 – 65Hz] ±2.0%rdg±5dgt [40 – 1kHz] |
|---|---|
| AC V | 60.00/600.0V (Auto-ranging) ±1.0%rdg±2dgt [45 – 65Hz] (600V) ±1.5%rdg±4dgt [40 – 1kHz] (60/600V) |
| DC V | 60.00/600.0V (Auto-ranging) ±1.0%rdg±3dgt (60V) ±1.2%rdg±3dgt (600V) |
| Ω | 600.0Ω/6.000/60.00/600.0kΩ (Auto-ranging) ±1.0%rdg±5dgt (600Ω) ±2.0%rdg±3dgt (6/60/600kΩ) |
| Continuity buzzer | 600Ω(Buzzer sounds below 90Ω) |
| Conductor size | Ø33mm max. |
| Applicable standards | IEC 61010-1 CAT IV 300V, CAT III 600V Pollution degree 2 IEC 61010-031, IEC 61010-2-032, IEC 61010-2-033, IEC 61326-2-2(EMC), IEC 60529 IP 40, EN50581(RoHS) |
| Power source | R03/LR03 (AAA) (1.5V) × 2 |
| Continuous measuring time | Approx.170 hours (When R3 is used)(NCV_LED:off) (Auto power save : approx. 10 minutes) |
| Dimensions | 204(L) × 81(W) × 36(D)mm |
| Weight | 220g Approx. (including batteries) |
| Included Accessories | 7066A (Test leads) 9079 (Carrying case) R03 (AAA) × 2, Instruction Manual |
Introduction Kyoritsu 2117R AC Digital Clamp Meter
The Kyoritsu 2117R AC Digital Clamp Meter is a versatile electrical measurement tool designed to accurately measure alternating current (AC) in various applications. Clamp meters, also known as clamp-on meters or current clamp meters, are essential tools for electricians, technicians, and professionals who work with electrical systems. They allow for non-intrusive current measurements by clamping around a conductor without the need to disconnect or break the circuit.
The primary function of this clamp meter is to measure AC current flowing through a conductor. It typically has a wide current range that it can measure, allowing you to work with different levels of current.
The AC Digital Clamp Meter features a digital display that shows the measured current in amperes (A) or milliamperes (mA), depending on the current range and setting.
The clamp jaw is the part of the meter that clamps around the conductor to measure current. It should be designed to accommodate different sizes of conductors and ensure a secure and accurate measurement.
Features
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS 60/600/1000A auto-ranging
• Long battery life
• Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V
Reviews
There are no reviews yet.