FORCE & HARDNESS

For force measurement, the process of calibration is the comparison of applied forces indicated by a measurement system under test to a calibration standard. The traceability of the standard used defines the resulting range and accuracy of the system being tested

Hardness Calibration should be performed on a periodic basis to verify that the accuracy of the instrument is within the manufacturer’s stated tolerances for the grade or model. As a hardness tester repeatedly measures the relative resistance of materials to denting, bending, or scratching, it can become misaligned. Calibration and adjustment will be required to restore its reliability.

STANDARD UNITS

 
 

FORCE GAUGES

Digital force gauge is force measuring device which has load cell inside. Digital force gauge indicates the measurement digitally, which reduces the human reading errors of test results and enhance the repeatability.
Lực kế
Máy thu độ bền kéo nén
 
 
 
 

TENSION AND COMPRESSION

Tension and compression refer to forces that attempt to deform an object. The main difference between tension and compression is that tension refers to forces that attempt to elongate a body, whereas compression refers to forces that attempt to shorten the body.
 
 
 
 

TENSION METER

These tension gauges are used as handheld devices and sensors for the continuous tension measurement with one or three rollers, whereby sensors with one roller can replace an existing deviating point.
Thiết bị đo lực căng dây
Thiết bị đo momen lực
 
 
 
 

TORQUE

In physics and mechanics, torque is the rotational equivalent of linear force.[1] It is also referred to as the moment, moment of force, rotational force or turning effect, depending on the field of study.
 
 
 
 
 

DIGITAL TORQUE METER

The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted
 
 
 
 
Máy kiểm tra momen lực
Máy đo độ cứng

HARDNESS TESTER

Brinell Hardness Test
The first widely used standardized hardness test, the Brinell method determines the indentation hardness of metal materials and is typically used for materials with a coarse surface or a surface too rough to be tested through other methods.

The Brinell test is not useful for fully hardened steel or other hard materials, however, and often leaves a large impression on the metal. The Brinell test is also very slow.
 
Rockwell Hardness Test
Developed to provide a less destructive alternative to the Brinell test, this differential-depth method eliminates the errors associated with mechanical imperfections.

Quicker and cheaper than the Brinell and Vickers tests, the Rockwell test requires no material prep, and hardness value is easily readable without any extra equipment, making this one of the most commonly used methods of measuring metal hardness.
 
Vickers Hardness Test
Making use of a diamond indenter, the Vickers hardness test is done with less force and more accuracy than the Brinell test. By magnifying the surface of a metal, this test can target specific microstructural constituents like martensite or bainite, or assess the quality of heat treating or surface hardening operations.

Requiring an optical system and material prep, the Vickers test incurs higher costs and takes longer to complete than the Rockwell test.
 
 
 
 
 

HARDNESS TEST BLOCKS

a comprehensive range of hardness reference materials (hardness test blocks) to suit your quality management procedure perfectly.
Tấm chuẩn độ cứng

Request a quotation

    COMPANY (*)

    PROVINCE

    NAME (*)

    TITLE

    PHONE (*)

    MESSENGER

    EMAIL (*)

    LIST OF EQUIPMENT NEED TO CALIBRATION